User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
2
Chap ter 1 Q uick Start
Front Panel F eatures
Front Panel Features
This section describes the controls on the front panel.
Figure 1–1 Front Panel Layout
• Speakers: Two Class D amplifiers drive two (left/right) full range
speakers.
• Headphone Jack: 1/4” stereo jack for optional headphones.
• Balance and Volume Knobs: The top knob controls the Volume .
Pressing this control sequences through a 20 dB speaker dip, mute,
and then back to the current volume. The bottom knob adjusts the
Balance between the speakers. Pressing the knob returns the audio
balance to center. Rotating either knob displays the change
graphically in the screen header when the Main Screen is
displayed. The Balance knob can be changed to a Volume knob
for the SuperPair. Refer to How Do I Set Up a SuperPair Volume
Control? on page 48.
• Navigation Buttons: The three buttons below the right screen
typically provide Help (left), Save/Exit (center), and Cancel
(right) functions for the configuration menus. Some menus will
have other functions for these buttons, but they are always clearly
labeled at the bottom of the screen.
• Left Screen: You can configure this screen to display video, meters,
or metadata.
• Right Screen: You can configure this screen to display meters,
metadata, or the configuration menus and context-sensitive help.
Headphone
Jack
Volume
Balance
Hot Keys/Menu Knobs
Right Screen
Right Speaker
Left Speaker
Left Screen
Navigation Buttons