User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
146
Chap ter 6 I nput/ Ou tput Modules and Options
Analog I/O Ca rd
Connector Pin Outs
The pin out of the balanced analog input connector is listed in Table 6–4
below.
Note:
The balanced analog input connector pin out is the same as
the commercially-available Tascam DA-88 adapter cables.
Table 6–4 Balanced Analog Input Connector Pin Out
Pin Function Use
1 Channel 8 (+) Non-inverted Balanced Analog Input
2 Ground Channel 8 Shield
3 Channel 7 (-) Inverted Balanced Analog Input
4 Channel 6 (+) Non-inverted Balanced Analog Input
5 Ground Channel 6 Shield
6 Channel 5 (-) Inverted Balanced Analog Input
7 Channel 4 (+) Non-inverted Balanced Analog Input
8 Ground Channel 4 Shield
9 Channel 3 (-) Inverted Balanced Analog Input
10 Channel 2 (+) Non-inverted Balanced Analog Input
11 Ground Channel 2 Shield
12 Channel 1 (-) Inverted Balanced Analog Input
13 (NC) Not Used
14 Channel 8 (-) Inverted Balanced Analog Input
15 Channel 7 (+) Non-inverted Balanced Analog Input
16 Ground Channel 7 Shield
17 Channel 6 (-) Inverted Balanced Analog Input
18 Channel 5 (+) Non-inverted Balanced Analog Input
19 Ground Channel 5 Shield
20 Channel 4 (-) Inverted Balanced Analog Input
21 Channel 3 (+) Non-inverted Balanced Analog Input
22 Ground Channel 3 Shield