User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
149
Chap ter 6 Input/Output Modules and Options
Do lb y D/E/D D+ Ca rd
Menu Modifications
You can select the analog input or the Toslink Input from the
Monitor Mixer Configuration Menu and also from the AES and
Analog Output Menus .
The Audio Processor Configuration Menu will now display an
Analog I/O knob. Pressing this knob will display the Analog Output
Configuration Menu from which you can select and configure the
outputs.
Connector Pin-Outs
Since the pin-outs of the Analog I/O and SPDIF TOSLINK Card are
identical to those of the Analog I/O Card, refer to Connector Pin-Outs
on page 149.
Dolby D/E/DD+ Card
Installing a Dolby D/E/DD+ Card activates the Dolby Configuration
and Metadata Display Menu and allows hot keys to be assigned to
the Dolby Zoom function
Note:
You can modify the analog reference levels in the
Hardware Configuration Menu .
Note:
Analog I/O cards with TOSLINK options will not allow the
analog outputs to be routed back to the monitor mixer. The
internal pathways used for this feature are also used by the
TOSLINK card.
Note:
The Dolby D/E Card does not have a rear panel adaptor.