User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
155
Chap ter 6 Input/Output Modules and Options
Adding /R em ovi ng Mo du les
Figure 6–11 Remove Nuts and Washers
4. Using the wrench, remove the nuts and washers from the REF
connectors as shown in Figure 6–11 above.
Figure 6–12 Remove System Control Board's Rear
Panel Adaptor
5. Remove the rear panel adaptor for the system control board as
shown in Figure 6–12 above.
6. Gently remove the ribbon cable from the system board.