User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
158
Chap ter 6 I nput/ Ou tput Modules and Options
Ad di ng/Re mo vi ng Modules
Figure 6–17 Insert Dolby D/E/DD+ Card
11. Insert the Dolby D/E/DD+ Card into the slot as shown in Figure
6–17 above.
Figure 6–18 Tighten First Standoff Screw
12. Adjust (if needed) and tighten the first standoff screw on the
opposite side of the system control board, and then attach another
screw on top of the standoff as shown in Figure 6–18 above.