User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
159
Chap ter 6 Input/Output Modules and Options
Adding /R em ovi ng Mo du les
Figure 6–19 Tighten Second Standoff Screw
13. Similarly, adjust and tighten the second standoff screw on the
opposite side of the system control board, and then attach another
screw on top of the standoff as shown in Figure 6–19 above.
Figure 6–20 Re-Seat System Control Board
14. Firmly press the system control board back into its slot so that it is
securely connected as shown in Figure 6–20. Generally, this board
does not snap in.