User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
4
Chap ter 1 Q uick Start
User Int erfac e
Help
If at any time you would like assistance with the function of any
control, pressing the Help button starts the context-sensitive help for
the screen as shown in Figure 1–3 below.
Figure 1–3 Screen/Menu Help
You can display help for any individual knob or button. For example,
press the Help button on any screen and then press one of the menu/
screen controls to display help specific to that control. See Figure 1–4
below.
Figure 1–4 Individual Control Help
If you do not press/rotate any other controls, the help will disappear
from the screen in approximately 15 seconds.
Preset Management Menu
Save / ExitHelp Cancel
Preset 4:
User Preset 4
Preset 1:
User Preset 1
Preset 1:
User Preset 1
Current Config
User Preset 1
Preset 1:
User Preset 1
Preset 4:
User Preset 4
Clear
Preset
Rename
Preset
Save
Current
Config
Copy
From
Copy To
Recall
On
Powerup
Press a control to display
help.
Preset Management Menu
Save / ExitHelp Cancel
Preset 4:
User Preset 4
Preset 1:
User Preset 1
Preset 1:
User Preset 1
Current Config
User Preset 1
Preset 1:
User Preset 1
Preset 4:
User Preset 4
Clear
Preset
Rename
Preset
Save
Current
Config
Copy
From
Copy To
Recall
On
Powerup
Turn to select which Preset
the current configuration is to
be saved into, then press.