User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
168
Chap ter 7 S pecif ications
Comp lianc e
Compliance
All components comply with UL, CE, FCC, and RoHs specifications.
Standards
Loudness measurements may be set up to comply with either ITU-
1770-3 or EBU R128 standards. Additional standards may be
accommodated by adjusting various loudness measurement
parameters. Refer to the Loudness Measurement Menu on page 117.
For the AVB card, the following standards apply:
IEEE 802.1AS, 802.1Qat, 802.1Qav
Incorporates basic 1722.1 protocol, including, advertisements,
discovery, and enumeration.
The AVB Ethernet interface is capable of communicating at up to 100
Mbits/s.
Specifications
The AMP2-16V Series monitors meet the following specifications.
Table 7–1 Specifications
Specification Values/Domains
Power requirements 100 V to 240 V AC ± 10%, 50/60Hz
Power consumption 250 Watts max
Dimensions
(H x W x D)
3.5” x 19” x 14.5”
(89 mm x 483 mm x 368 mm)
Weight about 18 lbs.; depends on configuration
Space Required 2 RU (rack unit)
Supplied Accessories AC Power Cord (North America)
Optional Accessories See card list in Table 6–1 on page 138.
LCD Resolution 800 x 480
Level Meter Resolution 310 segments