User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
8
Chap ter 1 Q uick Start
Sett in g Up Yo ur M onitor fo r t he Fir st Ti me
4. Press the Edit Cluster Label to display the Label Menu (Figure
1–7).
Figure 1–7 Label Menu
If you see a label in the Select Existing Label list that is close to the
label you want, rotate the Select Existing Label knob until that label
is highlighted. Then press the knob to replace the label in the Label
field with the selected label.
5. If needed, press the Backspace knob until the unwanted text of
the current label disappears, or rotate the Cursor Control knob to
move the cursor to the location where you want to add text.
6. Use the Shift button to toggle between upper and lower case
letters.
7. Turn the Select Horiz ontal knob (or the Select Vert ical knob) to
select the letter to type. Press the knob to type it.
8. When you have finished typing the name, press Save/Exit to
return to the Cluster Configuration Screen .
9. Repeat Steps 8 through 11 until you have named all the clusters
and pairs.
10. When you are finished, press Save/Exit repeatedly until you
reach the Main Screen .
Label Menu
Save / ExitHelp Cancel
Backspace
Select
Vert
Select
Existing
Label
Shift
Select
Horiz
Revert
a b c d e f g h i j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
<SPACE> & ( ) . / \ < > - [ ]
Mine Annc.
Stm1 Jack7
Three Msc.
Music2 Dolby 5.1
d
Cursor
Control
Label Text