User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
10
Chap ter 1 Q uick Start
Sett in g Up Yo ur M onitor fo r t he Fir st Ti me
IV. Select the Metadata to Display on the Screen
Status Data
If you do not wish to display status data, continue on to SMPTE 2020
Metadata on page 11.
1. From the Main Screen Configuration Menu , press the Status
Select knob to display the Status Select Menu (Figure 1–9).
Figure 1–9 Status Select Menu
2. Rotate the Line Select knob to scroll the highlight up or down
among the lines of text to select the line you want to modify.
3. Rotate the Data Select knob to select the type of data you want to
display on this line. (If you select [Empty] a blank line will result
on the Main Screen . This can be used to separate the data lines so
they are easier to read.)
4. Rotate the Text Color knob to select the text color of your choice.
Use brighter colors for data that is more important to you, or dim
colors for data that is less important.
5. Rotate the Font Size knob to select from a small, medium, or large
font, according to the importance of the data.
6. Rotate the Status Page knob clockwise to select among the three
available pages.
Status Select Menu
Help Save / Exit Cancel
Line
Select
Status
Page 3
Text
Color
Font
Size
Data
Select
Preset Name
Dolby Line Position Pair 5: N/P
Dolby Line Position Pair 6: N/P
(HD) 1920x1080/29.97i
SDID Embedding Method: B
[Empty]
Dolby Line Position Pair 1: 24
Dolby Line Position Pair 2: N/P
S2020 SDIDs Present: 1
S2020 Line Number: 14
Dolby Line Position Pair 3: N/P
Dolby Line Position Pair 4: N/P
Note:
The Lines of data on this display are arranged exactly as
they will appear on the Main Screen.