User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
29
Ch apt er 3 The “How Do I...” Chapter
Frequently As ked Q uestions
How Do I Cluster Meters Pairs Together for Easy
Readability?
Clustering the meter pairs in logical arrangements enhances the at-a-
glance readability of the meters. It also assures that the Loudness
calculations are accurately represented. After setting up the meter
clusters, the Cluster Select hot keys are automatically configured so
that they select the clusters you defined.
Meter clustering is done in the Cluster Configuration Screen :
Figure 3–3 Cluster Configuration Screen
1. If you have already assigned the channel functions in the Monitor
Mixer Configuration Menu , press the Auto Set control and
proceed to step 4.
2. Turn the Select Cluster control to select the channel pair that
you want the cluster to start on. Note that the blue bracket at the
top moves to select the beginning of the cluster.
Cluster Configuration Screen
Configuration Selection
Menu
Main Screen
Menu
Configure
Monitor Mixer
Monitor Mixer
Configuration Menu
Set Clusters
00
-60-60
-50
-40
-30
-10
-20
-10
-20
-30
-40
-50
P
a
i
r
1
P
a
i
r
2
P
a
i
r
3
P
a
i
r
4
P
a
i
r
5
P
a
i
r
6
P
a
i
r
7
P
a
i
r
8
Cluster Configuration Screen
Save / ExitHelp Cancel
1 2
Cluster
Start
Edit
Cluster
Label
Cluster
End
Select
Cluster
Default
2
Cluster Configuration Screen
Auto Set