User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
43
Ch apt er 3 The “How Do I...” Chapter
Frequently As ked Q uestions
Figure 3–14 Dolby Decoder Configuration Menu
How do I Display Dolby E Line Number (Guard
Band)?
As part of the Status Data screen, the AMP2-16V will display the line
position of each Dolby E bitstream contained in a 3G/HD/SD-SDI
signal, for guard band checking. This may be shown for any or all
Dolby E bitstreams simultaneously on the same screen. As with other
Status Data, Dolby E the line position can be shown in a color and size
that is appropriate to its importance to you.
To show this data, first set up a Status/Metadata hot key:
1. Turn the control associated with the hot key that you want to use
for the Status/Metadata control. Press the control until the two-
tone brown Status/Metadata function is found.
Dolby Decoder Configuration Menu
Save / ExitHelp Cancel
Decoder Source
Pro-16 Mode
Channel
Dolby E
Program
Slot 1 (AES
In) Pair 1
Channel 1
Program 1
Decode
Aux Pair
DRC Mode
All formats
LtRt Downmix
Line Mode
Coding Mode
1/0 (C)
Bitstream Mode
Complete Main
Dialogue Level
- 27 dBFS
Frame Rate
29.97 fps
LFE Channel
Disabled
Surround Mode
Not Srnd Encoded
Mdata Scroll
CRC Error
Reporting
On
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen Main Screen
Configuration Menu
Hot Key 1-8
Configuration Menu
or
Hot Key 9-16
Configuration Menu
Configure
Hot Keys