User guide
821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
48
Chap ter 3 T he “H ow Do I .. .” Chap te r
Frequently Aske d Q ue stions
Figure 3–19 Monitor Mixer Configuration Menu
1. Rotate the
Mixer Channel Select
to select the 9th channel pair,
the SuperPair.
2. Rotate the
Source Pair Select
to select the audio processor card
slot and desired input pair on that card.
3. You may want to adjust the
Channel Trim
control to increase or
decrease the input gain to the level you need, relative to the other
channel audio levels. Turn the
Mixer Channel Select
knob to the
channel you want to adjust and then turn the
Channel Trim
knob
to adjust the level. If you will be using the
Balance
control as a
SuperPair
Volume
control, then set these trims to
0
.
How Do I Set Up a SuperPair Volume Control?
A SuperPair is a 9th audio input pair that can be heard along with the
normally monitored audio channels. You can reconfigure the front
panel
Balance
control to become a SuperPair
Volume
control, that
will work independently of the main front panel
Volume
control. Like
the main
Volume
control, the SuperPair
Volume
control can be
pressed to dim or mute the SuperPair audio.
Monitor Mixer Configuration Menu
Save / ExitHelp Cancel
Chan 15 Chan 16 Super 1 Super 2
SuperPair
Slot 2 SDI-3G In
Pair 4
Slot 4 Toslink Input
+0 +0 +0+0
Channel
Trim
Source
Pair
Select
Phase
LED
On/Off
Delay Off
Audio
Delay
Pair 8
Speaker
Mute:
Off
L Front R Front L Front R Front
Channel
Func
Mixer
Channel
Select
Set
Clusters