User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
50
Chap ter 3 T he “H ow Do I .. .” Chap te r
Frequently Aske d Q ue stions
How Do I Mix Any Input(s) to Any Output(s)?
Any of the input channels can be mixed to any of the AES or analog
outputs. The mixer controls for each AES or analog output are in the
Analog or AES Output Card Configuration Menu and on the 3G
SDI I/O Configuration Menu :
Figure 3–21 AES Output Configuration Menu
1. Press the Follow Monitor / Free Mix control to select Free Mix ,
as shown in Figure 3–21 above.
2. Any input channel can be mixed to one or more output channels.
Turn the Mixer Channel Select knob to select an output strip.
3. Turn the Mix Input Select knob to select the slot and pair
containing the channel to be mixed.
4. Turn the Output Assign knob to select an output channel that
will receive the input source. Press the knob to route the input
Configuration Selection
Menu
Main Screen
Menu
Audio
Processors
Audio Processor Card Menu
AES Output
Configuration Menu
Analog Output
Configuration Menu
or
Analog -or- AES
Card Configuration
AES Output Slot 4 Configuration Menu
Save / ExitHelp Cancel
Slot 3 (AES In)
Pair 1
Slot 5 (SDI In)
Pair 3
Output
Assign
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
Pan
+0+0+0
+0
Mix Input
Select
Chan. 1 Chan. 2 Chan. 3 Chan. 4
Mixer
Channel
Select
Channel
Trim
Follow
Monitor
Free Mix
Free Mix