User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide

Ch apt er 3 The “How Do I...” Chapter

Frequently As ked Q uestions

signal to the output. One input can be routed to as many outputs

as desired.

5. Turn the

Channel Trim

knob to adjust to mix level of that

channel.

6. Turn the

Pan

knob to pan the input channel between the selected

even and odd output channels.

How Do I Adjust Mixer Levels from the Main

Screen?

Any of the input channels can be mixed to any of the AES or analog

outputs. Although mix levels can be set in the output configuration

menus of each output card, hot keys can be used to allow you to adjust

mix levels from the

Main Screen

. The hot keys for mixer controls are

set in one of the

Hot Key Configuration Menu.

This can also be done

for the monitor mixer:

Configuration Selection

Main Screen

Configure Main

Screen Main Screen

Configuration Menu

Hot Key 1-8

Configuration Menu

Hot Key 9-16

Configuration Menu

Configure

Hot Keys