User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
55
Ch apt er 3 The “How Do I...” Chapter
Frequently As ked Q uestions
However, you can also set the clock source to any AES input pair or to
the Reference Genlock Input .
This setup is done in the Hardware Configuration Menu :
Figure 3–25 Hardware Configuration Menu
1. Turn the Clock Source knob to select the preferred clock and
press it. This control will always display the current sync source in
the lower rectangle. If the selected source and the current source
Configuration Selection
Menu
Main Screen
Menu
Configure
Options Option
Configuration Menu
Hardware
Configuration Menu
Configure
Hardware
Hardware Configuration Menu
Save / ExitHelp Cancel
Unit
Info
Factory
Default
-20dBFS = +4 dBu
Analog I/O
Ref Level
Current: Internal Sync
Clock
Source
Selected Slot 4 (AES In) Pair 1
8 hours
Screen
Saver
Screen
Bright
Balance
Control
Menu Lock
SuperPair
Balance
Left Right
16 32