User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
58
Chap ter 3 T he “H ow Do I .. .” Chap te r
Frequently Aske d Q ue stions
Figure 3–27 Select Menu Lock Combination
1. Instructions are located on the screen. Simply press the knobs to
form an unlocking combination. In Figure 3–27 above, the
combination is 1-3-7. Make sure you remember the combination
you set!
2. To remove the lock, press the knobs so that none of them are
yellow.
3. In the Main Screen , the Menu button will be labeled Menu
Locked after you set a lock combination.
4. To gain entry to the menus, hold the Menu Locked button while
pressing the lock combination on the eight knobs, one at a time, in
any order. Then release the Menu Locked button and you will
gain access to the menu system.
5. When you leave the menu system and return to the Main Screen ,
the menu system is automatically locked again.
How Do I Find Software Version Information?
Occasionally, when speaking with a customer service representative, it
is necessary to locate the software versions of the software in the
AMP2-16V. This is simply a screen that can be called up. This screen
also reports which audio processors are installed in the product.
Select Menu Lock Combination
Save / ExitHelp Cancel
Key 5
Key 6
Key 3
Key 1
Key 2
Key 4
Key 7
Key 8
Select Menu Lock combination by pressing
the encoders to indicate the desired
combination.
To unlock the first menu, hold the center
navigation button and press the
combination.
Current Status: Lock Enabled