User guide
821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
78
Chap ter 4 F e at ur es a nd Sc reens
Do lb y Zoo m Sc re e n
individual channels for troubleshooting purposes. The
Dolby Zoom
Screen
also lets you scroll through multiple lines of metadata, that
appear on the screen adjacent to the metered channels. Then, with the
press of a button, you can quickly return to your normal monitoring
screen.
Cluster Select
hot keys will automatically change to
Dolby Zoom
hot keys when a Dolby bitstream is detected in the cluster.
Alternatively, you may set up permanent
Dolby Zoom
hot keys. For
details on how to monitor a Dolby bitstream all the time without using
Dolby Zoom
, refer to the How Do I Decode and Monitor a Single
Dolby Bitstream? on page 39 for details. Refer to the How Do I Monitor
Dolby Bitstreams? on page 38 for details on how to set up a
Dolby
Zoom
hot key that is not combined with a
Cluster Select
hot key.
A Dolby bitstream may also be decoded and output through an
optional AES Output Card or an Analog I/O Card completely
independently of other monitoring. Refer to the How Do I Mix Any
Input(s) to Any Output(s)? on page 50 for details.
The
Dolby Zoom
feature allows you to view the Dolby metadata and
the level meters simultaneously while also monitoring the Dolby audio
pairs in the front panel speakers.
If a cluster contains a Dolby bitstream, then the
Select Cluster
hot key
associated with it (if there is one) will automatically change to a
Dolby
Zoom
. If the bitstream should disappear or change to PCM, then the
hot key will change back to a
Cluster Select
.
To display the
Dolby Zoom
screen from the
Main Screen
, press a
Dolby Zoom
hot key. For detailed instructions for creating a
Dolby
Zoom
hot key, refer to How Do I Monitor Dolby Bitstreams? on page
38.
Note:
This automatic operation is subject to the following
restrictions:
1. This feature only applies to the AMP2-E16V (e.g., the
monitor must contain a Dolby decoder).
2. You have selected
Dolby Zoom
as the Dolby decoder
source in the
Dolby Configuration Menu
.
3. You selected
Auto
for the
Decode
type in the
Dolby
Configuration Menu
.