Data Sheet

iAM-12G-SDI available with
Multi-Channel Audio and 12G/4K Video Monitoring & Metering of IP and Baseband Signals
[e-mail] www.wohler.com
State of the art 12G video and
audio monitor with touch screen
controls, and APIs for remote
management.
Model
Part ID
Description
iAM-12G-SDI
8114-0351 Base Unit
2 RU Audio/Video monitoring and metering. 2 x SDI on BNC. 4 pairs of AES inputs
on HD-15 and 16 channels of analog on two DB-25s included.
OPT-DOLBY D DD+ E
829167
Processing Option
Enable monitoring of Dolby® D, DD+, E and ED2 streams.
OPT-DOLBY ATMOS
829163
Processing Option
Enable monitoring of Dolby® Atmos, as well as Dolby D, DD+, E and ED2 streams.
SFP-2110 w/Ember+
829086
SFP I/O Option
SMPTE 2110 receiver; Multi-Mode 850 NM, LC (fiber) Connectors. SMTPE
SFP-2110 w/NMOS
829086-1
SFP I/O Option
SMPTE 2110 receiver; Multi-Mode 850 NM, LC (fiber) Connectors. SMTPE
SFP-2022
829088
SFP I/O Option
SMPTE 2022 receiver, LC (fiber) Connectors.
SFP-2110 w/Ember+ +2022-6
829087
SFP I/O Option
SMPTE 2110 or 2022-6 receiver; Multi-Mode 850 NM, LC (fiber) connectors.
SFP-2110+2022-6 w/NMOS
829087-1
SFP I/O Option
SMPTE 2110 or 2022-6 receiver; Multi-Mode 850 NM, LC (fiber) connectors.
SFP-SDI
829089
SFP I/O Option
3G/HD/SD-SDI single video receiver w/active loopback, HD-BNC
SFP-12G-SDI-FIBER
829160
SFP I/O Option
12G, 3G/HD/SD-SDI single mode Opt. LC (fiber) video receiver. LC (fiber) conns
SFP-SDI-FIBER
829084
SFP I/O Option
3G/HD/SD-SDI or ASI single receiver w/active loopback, LC (fiber) connectors
SFP-SDI-OUTPUT
829083
SFP Output Option
3G-SDI Transceiver; HD-BNC connectors; I/P and O/P are both SDI
SFP-HDMI-OUTPUT
829155
SFP Output Option
HDMI/DVI Output SFP with1080p60 video with 2 channels of audio
Wohler Technologies is extending its ground breaking iAM Series of products with a new multi-channel
audio and 12G video monitor that accepts 2 x 12G/3G/HD/SD-SDI signals over BNC. 4 SFP cages allow for
a variety of additional monitoring options, including 2110, 2022-6, as well as additional SDI inputs in a
variety of combinations listed in the table below. Our Dolby® ATMOS option allows decoding of Dolby
Atmos content, along with the familiar Dolby D, D+, E and ED2 content. Loudness measurement using
ITU-R BS. 1770 or EBU R128 is included as standard.
Flexible. Adaptable. Future Proof.
iAM-12G-SDI is designed to be easy to operate, yet powerful enough to provide high quality, accessible
and easy to use monitoring of the newest signals (12G, 2110, 2022-6) within a compact form factor.
Incorporating the latest technology, physical and touch screen front panel controls duplicate previous
mature design philosophies of shipping iAM units.
With both front mounting speakers and sub-woofers, the iAM-12G-SDI provides the powerful sound
output and audio reproduction that Wohler is well known for.
A front mounting USB port is available for simple software updates. Multiple units on the same network
can be updated, monitored and controlled via a browser-based user interface that supports fast
configuration with authentication that protects critical configurations from unauthorized alteration.
Features/Benefits:
• 2 x 12G (4K) SDI inputs that also monitor 3G/HD/SD-SDI signals as well
• 4 x SFP cages allowing a range of optional connectors and signal processing options, fully listed in
the table below
• Optional Dolby® Atmos that also decodes Dolby D, D+ E and ED2 streams for playback, metering
and metadata
• Touch screen front panel for easy, intuitive control
• Measure Audio Loudness using ITU-R BS. 1770 or EBU R128 standards
• Video monitoring and audio monitoring of up to 16 channels of audio from multiple sources
• Built-in speakers, headphone jack, USB and Ethernet ports
• Store and retrieve presets via USB or remote software control
• Software upgradeable via USB or network, upgrade multiple units at once
• APIs for remote control