Specifications

22
SDC-10 1080p D-ILA
®
3D Front Projector User’s Manual
Installing the Projector and Screen
While installing, please place this unit and the screen perpendicular to each other. Failing to do so may increase trapezoidal distortion.
Set Angle
The angle range which can be set for this projector is ±30°.
• Malfunctions may occur if the angle is not set within the above range.
Shift
Left/Right Position
* 0% up/down position (center)
Approximately 34% (maximum) of the projected image
Approximately 34% (maximum) of the projected image
Up/Down Position
* 0% left/right position (center)
Approximately 80% (maximum) of the projected image
Approximately 80% (maximum) of the projected image
Lens shift correlation chart:
• Maximum Up-Down shift varies with the amount of Left-Right shift.
Likewise, maximum Left-Right shift varies with the amount of Up- Down shift.
• The values on the chart are intended to act as a guide.
Use them for reference during installation.
Left-Right Shift(%) 0% 10% 20% 30% 34%
Up-Down Shift (%) 80% 66% 47% 18% 0%
90
80
70
60
50
40
30
20
10
0 10 20
30 40
Horizontal lens shift（％）
Vertical lens shift（％）
Lens Shift
Movement Range
Lens movability range