User manual

11
G
z Always mow slopes at right angles to the incline; never mow
up and down.
z When mowing slopes, be especially careful when changing di-
rection.
z Never mow steep slopes.
z Be especially careful when mowing backwards and pulling the
lawnmower towards you.
z Switch the mower off when tilting it, running on empty or trans-
porting the lawnmower, e.g. to/from a lawn or along paths.
z Never use the lawnmower if safety devices are faulty or mis-
sing, such as deflector and/or grass catchment devices.
z Caution: do not touch running cutters.
z Always keep hands and feet away from rotating parts. Do not
stand in front of the grass ejector opening.
z Never lift or carry a lawnmower while the motor is running.
z Never open the guard flap while the motor is still running.
z Before removing the grass catchment device, turn off the mo-
tor and wait until the cutting gear has stopped running. After
emptying the grass catchment device, reattach carefully.
z Never drive across gravel while the motor is running – impac-
ting stones!
z Avoid mowing wet grass where possible.
z Switch off the lawnmower, pull the mains plug and wait for the
lawnmower to stop running if, for example:
– leaving the lawnmower
– unblocking a blade
– intending to check, clean or work on the lawnmower
– you have encountered a foreign object, in which case you
should check the lawnmower for damage and carry out any
necessary repairs.
– the lawnmower is vibrating heavily (switch off immediately
and ascertain the cause).
– you wish to change the settings or carry out cleaning work.
– you wish to check whether the connection cables have be-
come tangled or damaged.
– If the connection cable is damaged during use, it must be
immediately disconnected from the mains power supply.
Do not touch the cable before it has been disconnected
from the mains power supply.
Maintenance
1 Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z Pull out the power plug.
z Do not touch running blades.
z Never spray down the lawnmower using water, especially not
at high pressure.
z Regularly check and tighten all visible screws and nuts, espe-
cially those relating to the cutting bar, to ensure a firm fit.
z Always have blades changed or re-sharpened by a specialist
workshop, since a balance test must be carried out as speci-
fied in the safety regulations following any removal of parts.
z Only use original WOLF-Garten spare parts. Otherwise we
can’t guarantee that your mower conforms to the safety regu-
lations.
z Never park your lawnmower in damp rooms.
z For safety reasons, replace worn or damaged parts.
Disposal
Assembly
Fasten handle bars
1 Caution!
The cable can be damaged while folding up or pulling out
the handle bar.
z When adjusting the handle height take care that the
cable is not crimped
z See illustrations.
Mount the collecting bag
z See illustrations.
Operation
Operating times
z Please check noise abatement regulations prevailing in your
country.
Adjust cutting height
1 Caution! Rotating knife
Working on or adjusting the machine only with the machine
turned off and stationary cutting tool.
z Turn off motor and pull out the plug.
1. Pull wheels to the front
2. Let the wheels lock into the desired position.
1 Take care that all the wheels are at the same cutting
height.
3 Cutting height - Grass growth
Mow dry grass, far as possible, so as not to mar the sward.
It is advisable to mow with greater cutting height (60 mm) in
case of moist or high grass.
Do not dispose of electrical equipment in domestic
waste. Recycle equipment, accessories and pa-
ckaging in an environment-friendly manner.
A
B
C
D
E
F
G