Design Guide

wolfappliance.com | 73
INDUCTION | ELECTRIC COOKTOPS
Planning Information
A minimum 2" (51) is required from the bottom of the
cooktop to combustible materials.
Contemporary induction and electric cooktops can be
mounted ush with the top of the countertop, or as a frame-
less standard installation sitting on top of the countertop
surface. If the cooktop is to be mounted ush with the
countertop, a recessed area surrounding the cooktop cutout
must be provided.
IMPORTANT NOTE: Flush mount installations are intended
for granite, solid surface, or stone countertop surfaces only.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes.
Locate the electrical supply as shown in the illustrations on
the following pages. A separate circuit servicing only this
appliance is required.
ELECTRICAL REQUIREMENTS
INDUCTION
Electrical Supply grounded 3-wire, 240/208 VAC, 60 Hz
Conduit exible 4'
(1.2 m)
ELECTRIC
Electrical Supply grounded 3-wire, 240 VAC, 60 Hz
Electrical Supply (208 V) grounded 3-wire, 208 VAC, 60 Hz
Conduit exible 4'
(1.2 m)
SERVICE
24" Induction 30 amp dedicated circuit
30" Induction/Electric 40 amp dedicated circuit
36" Induction/Electric 50 amp dedicated circuit