Use and Care Guide

wolfappliance.com

BOOST MODE (INDUCTION)

For induction cooktops, boost mode boosts power on one

element by diverting power from an adjacent element. If

the adjacent element is on high, the power output will be

reduced. The reduction in power will be displayed on the

power level indicator of the adjacent element. Refer to the

illustration below.

will illuminate when an element is in

boost mode.

Boost mode will deactivate automatically after approxi-

mately 15 minutes of continuous operation and can be

reactivated if desired.

Cooktop Operation

SINGLE ELEMENT AND INNER ZONE

Setting controls:

1 To activate a heating element, touch ON/OFF for the

desired single element on the control panel. Power level

indicator will ash and all indicators for that zone will

ash. Refer to the illustration below.

2 To complete the activation, touch HI for highest heat,

SIM (MLT) for lowest heat, BOOST (induction) to activate

boost mode, or touch desired power level indicator.

3 To change heat setting while the element is on, touch or

slide to desired power level.

4 To turn element off, touch ON/OFF.

IMPORTANT NOTE: For induction cooktops only, if no

cookware or an incompatible pan is placed on an induction

element after activation, the control will ash for 30 sec-

onds, then the element will turn off automatically.

COOKTOP OPERATION

Element activation

ON/OFF

Boost mode

BOOST