Use & Care Manual

wolfappliance.com | 13
Cooktop Operation
BRIDGE ELEMENT (INDUCTION)
Setting controls:
1 To activate bridge, select desired power level on one of
the single elements.
2 Touch BRIDGE between corresponding element con-
trols to bridge elements front to back, BRG to bridge
elements side to side, or ALL BRIDGE to bridge all
elements.
, or will illuminate respectively.
3 To change power level, adjust the power level on any
active bridged element.
4 To turn off, touch ON/OFF on any active bridged
element.
For 36" induction cooktops, ALL BRIDGE should be used
for cookware larger than 12"
(305) in diameter. For smaller
cookware, use the right rear element.
COOKTOP OPERATION
Bridge element activation.
BRIDGE
BRIDGE ELEMENT (ELECTRIC)
Setting controls:
1 To activate bridge element, select desired power level on
one of the single elements.
2 Touch BRIDGE. will illuminate.
3 To change power level, adjust the power level on either
active bridged element.
4 To turn off, touch ON/OFF on either active bridged
element.