Use and Care Guide

12 | Wolf Customer Care 800.222.7820
Cooktop Operation
DUAL-ZONE OR OVAL ELEMENT (ELECTRIC)
Setting controls:
1 To activate a dual-zone or oval element, touch On/
O on the control panel. The power level indicator will
flash and all indicators for that zone will flash.
2 Set the desired heat level for the inner zone as
described on page 11. Outer zones cannot be turned on
independently of the inner zone.
3 Touch Zone 2 or Oval. The outer zone will be set to the
same heat setting as the inner zone.
or illu-
minates to indicate the outer zone is on. Refer to the
illustration below.
4 Change the heat setting for the entire dual-zone or oval
element the same as for a single element. Both zones
maintain the same heat setting.
5 To turn the outer zone o, touch Zone 2 or Oval. To
turn the entire element o, touch On/O.
TRIPLE-ZONE ELEMENT (ELECTRIC)
Setting controls:
1 To activate the triple-zone element, touch On/O on
the control panel. The power level indicator will flash
and all indicators for that zone will flash.
2 Set the desired heat level for the inner zone as
described on page 11. The outer zones cannot be
turned on independently of the inner zone.
3 Touch Zone 2. The middle zone will be set to the same
heat setting as the inner zone.
illuminates to indi-
cate the middle zone is on.
4 Touch Zone 3. The outer zone will be set to the same
heat setting as the inner and middle zones.
illu-
minates to indicate the outer zone is on. Refer to the
illustration below.
5 Change the heat setting for the entire triple-zone ele-
ment the same as for a single element. All three zones
maintain the same heat setting.
6 To turn the outer zone o, touch Zone 3. To turn the
middle zone o, touch Zone 2. To turn the entire ele-
ment o, touch On/O.
Dual-zone element activation
ZONE 2
Triple-zone element activation
ZONE 2 ZONE 3
Cooktop Operation