User's Manual

14
WOLF COOKTOP VENTILATION HOODS
IMPORTANT NOTE: Before turning the power
on to the ventilation hood, make sure the
b
lower is in the OFF position.
front
electrical
box
TOP OF
HOOD SHELL
discharge
collar
red
black or
white
(neutral)
HOOD FRONT
small
flat-blade
screwdriver
Remote blower wiring A
black or
white
(neutral)
red
green/
yellow
white
(neutral)
black
front
electrical box
TOP OF
HOOD SHELLHOOD FRONT
discharge
collar
external
blower
wiring
Remote blower wiring B
REMOTE BLOWERS
REMOTE BLOWER WIRING
1
)
R
emove the cover from the front of the
electrical box. Remove the electrical box
knockout that faces the hood's discharge
c
ollar.
2) Disconnect the red and black or white wires
using a flat-blade screwdriver. Refer to
illustration A below.
3) Insert 6" (152) of the remote blower wiring
through the knockout opening. Secure the
cable to the electrical box with an appropri-
ate connector. Use wire connectors or wire
nuts approved by UL or C/UL.
4) Attach the remote blower wiring where
the wires were removed in step 2. Refer to
illustration B below.
IMPORTANT NOTE: Note location of wire
colors.
5) Reinstall the electrical box cover and
screws. Make sure that all wires are secure
and that no wires are pinched between the
cover and box.