ProScaler
ProScaler Preface ABOUT THIS BASIC USER AND CONNECTIVITY GUIDE This guide is designed for use with the Wolf Cinema DCL-200FD Home Cinema Projector and outboard ProScaler™ Video Processor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information and specifications in this document are subject to change without notice. COPYRIGHT © Copyright 2010 Wolf Cinema.
ProScaler High Definition Video Processor User’s Manual Notices WARNING! To meet FCC requirements, a shielded power cord is recommended in order to prevent interference. It is essential that only the supplied power cord is to be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not approved by the party responsible for compliance could void your authority to operate the equipment. WARNING! High-brightness light source.
ProScaler Contents Preface.................................................................................................................................................................................1 Notices .................................................................................................................................................................................2 Introduction Features ..................................................................................................
ProScaler High Definition Video Processor User’s Manual Picture Controls ProScaler Enhancement...............................................................................................................................................21 Mosquito Noise Reduction............................................................................................................................................21 Settings Settings Menu ................................................................................
ProScaler Introduction Wolf Cinema’s ProScaler serves as the nerve center of your home cinema. It is both an intelligent central switching hub for all your video components, plus provides for advanced video processing on all types of video signals. It comes with a simple, easy to use IR universal remote controller so that you can operate the entire system with just the one remote.
ProScaler High Definition Video Processor Connectivity RS-232 Port User’s Manual GPIO Port Component Video Inputs HDMI 1-5 (HDMI 6 on Front Panel) AC Input Composite Video HDMI Video/Audio Output IR - In S-Video HDMI Audio Outpute Service Reset Flexible Component Video Inputs This group of connectors can accept 3 types of analog component video inputs: Component (YPbPr) (2 Inputs) This is the most common type of component analog signal. Cables are usually 3 RCA-> RCA type.
ProScaler HDMI 1.3 ProScaler has a total of 6 HDMI inputs, version 1.3. Five inputs are on the rear panel, and one HDMI inputs is located on the front of the unit, just under the removable Wolf Cinema logo plate. HDMI carries both video and audio signals. Note: HDMI is compatible with DVI using an HDMI to DVI adapter cable. DVI connectors do not carry the audio signal stream, as do HDMI interconnections. HDMI Video/Audio Output This connector is used to send all video signals to your Wolf Cinema projector.
ProScaler High Definition Video Processor User’s Manual Setup Before Setting Up Note: • Before connecting, be sure to turn off both the projector, the ProScaler and the devices to be connected. After making all connections, turn on the projector, ProScaler and then the other devices. • When connecting a computer, be sure that it is the last device to be turned on after all the connections are made. • Be sure to read the operation manuals of the devices to be connected before making connections.
ProScaler Cable Types HDMI: HDMI, or High Definition Multimedia Interface, is the only interconnection scheme that can carry both audio and video on the same cable. Coax: Coax is a shorthand way of saying “coaxial cable.” In the consumer audio/video industry, the term “Coax” is is a type of digital audio interconnect which uses an RCA style cable. Single coax video cables may be colored white or yellow; the component bundle may be colored red-green-blue.
ProScaler High Definition Video Processor User’s Manual System Remote Control – Key ProScaler Functions The following are the key PROSCALER functions, within the common remote control structure. Note: SELECT THE SCALER BUTTON TO ENABLE THE PROCESSOR CONTROLS. Also refer to the separate Wolf Cinema ProScaler User Guide for additional details.
ProScaler Wolf Cinema’s DCL-200FD projector is optimized to work with the included ProScaler. The ProScaler and projector are carefully calibrated at the factory to support all basic functionality “out of the box.” The projector uses one primary HDMI input, which accepts all incoming video signals as delivered from the ProScaler. The ProScaler processes and routes the variety of source components via the input selected.
ProScaler High Definition Video Processor User’s Manual Note: Wolf Cinema always recommends that you, your custom installer or video calibrator thoroughly test the HDMI video cable(s) with the entire system prior to final installation. HDMI cables vary greatly in overall quality and signal integrity. Many HDMI cables are not designed to support certain information and signal timings over long cable runs.
ProScaler Projector: The Projector will remain in a stand-by OFF mode until turned on via the supplied IR remote control, or by receipt of a discrete ON command from your home automation control system. To activate the Projector, select the TV/Projector button on the IR remote control, then depress and HOLD the green POWER ON button at the top of the remote. The projector will turn on in approximately 30 seconds.
ProScaler High Definition Video Processor Connecting Video Equipment Using an S-Video or a Composite Video Cable Using an S-Video or a Composite Video cable, a VCR, laser disc player or other video equipment can be connected to the labeled input terminals.
ProScaler Connecting a Computer Connect the computer by either a 15-pin VGA to RGBHV cable (optional accessory, sold separately) or to a VGA to HDMI converter (also an optional accessory, sold separately). The 15-pin VGA to RGBHV cable may be connected to the appropriate component input (1 or 2, depending on the type of PC sync). Note: • See page 43 “Computer Compatibility Chart” for a list of computer signals compatible with the system.
ProScaler High Definition Video Processor User’s Manual Remote & Menus Controlling ProScaler Menus and User Interface You can control Wolf Cinema’s ProScaler using the Menu system. The Menus are logically organized to make control and setup easy while using just a few remote buttons.
ProScaler Menu Organization The system Menus are organized as a hierarchy, in which you move from left to right. Think of the Main Menu screen as the leftmost or “highest place” in the hierarchy. Up/Down Arrows move a Highlight Bar vertically. Right Arrow moves to the next screen until you reach a screen where you can make changes. Move to the left in the hierarchy using the left arrow. This takes you “higher” or “back to the original area” in the hierarchy.
ProScaler High Definition Video Processor User’s Manual Main Menu Select Input Scaler -> Main Menu -> Select Input Input Select Selection There are 2 ways to select source components (inputs): 1 Switch inputs using the Select Input Menu, or 2 Select first the SCALER button and then access the desired input using the numeric keypad. Zoom and Pan Scaler -> Main Menu -> Zoom & Pan -> Zoom The Zoom control allows you to magnify your picture.
ProScaler Pan H or V Scaler -> Main Menu -> Zoom & Pan -> Pan H or V The pan feature allows you to move around on a zoomed picture. As you move around, you expose parts of the picture that were not visible because the picture was Zoomed. Pan works only on a Zoomed picture. The controls on this screen work differently than most screens. The controls are work like the Zoom H or V described on the previous page. Uses Up/Down arrows to zoom vertically, and Left/Right arrows to zoom horizontally.
ProScaler High Definition Video Processor User’s Manual Brightness Control Scaler -> Main Menu -> Picture Controls -> Brightness Video brightness controls work by adjusting black levels. When you make an adjustment to the brightness control, all levels of interscene image brightness (from black to peak white, but most noticeably in the dark areas of the picture) are shifted from darker to brighter. The Brightness control is complimentary to the Contrast control on the next page.
ProScaler Picture Controls Detail Enhancement Scaler -> Main Menu -> Picture Controls -> Detail Enhancement Detail Enhancement is a control to increase (or decrease) the ProScaler detail (“sharpness”) of the image. Use this control in moderation, as excessive settings adjustments may cause the image to look distorted and unnatural.
ProScaler High Definition Video Processor User’s Manual Settings Settings Menu Scaler -> Main Menu -> Settings Your Wolf Cinema’s ProScaler provides a rich set of configuration options, accessible through the Settings Menus. Output Format: Output format refers to the resolution scanning scheme (progressive or interlaced) and frame rate of the output.
ProScaler Settings Audio Select Audio Output Scaler -> Main Menu -> Settings -> Select Audio Output Decision Logic for Auto Select: The table below shows the connector choice for audio when Auto Select is chosen. Note: “EDID” is information about the capability of a display or AV Receiver that is automatically read by ProScaler over the HDMI or DVI cable. Output Connector Conditions Video/Audio HDMI Display has audio capability (reported via the EDID).
ProScaler High Definition Video Processor User’s Manual Game Mode Scaler -> Main Menu -> Settings -> Game Mode About Game Mode The video processing performed in the Wolf Cinema ProScaler adds a few milliseconds of delay to your video and audio. For most viewing this delay is not a problem, but if you are playing video games that require quick response on your game controls, the delay can be noticeable and annoying.
ProScaler Remote Control The Wolf Cinema’s ProScaler Universal Remote The earlier chapters focused on controlling the Wolf Cinema ProScaler. This chapter discusses the use of the remote to control other components in your system. Wolf Cinema’s ProScaler remote is a universal type. It allows you to control up to 8 components (including the Wolf Cinema Projector and ProScaler) in your audio/video system with this single remote.This remote can be used for the day to day operation of your entire system.
ProScaler High Definition Video Processor User’s Manual Modes You can control individual components in your setup by pressing one of the mode buttons. This switches the remote into a mode in which it communicates with the component you selected. Seven of the mode select buttons are located near the top near the power on/off. The TV/Projector labeled button controls the Wolf Cinema Projector functions.
ProScaler Macros A Macro allows you to perform a series of button presses using a single button. Macros are useful if you find that you often repeat the same series of button presses. For example, a Macro can be used to power up all the components in your system with a single button press. Let’s say that find that you often pick up your remote and power up your Projector, AV Receiver, and set-top box together: this particular set of power-up button sequences is used again and again in your setup.
ProScaler High Definition Video Processor User’s Manual B. Using Auto Search Method Step 1] Turn on the Device you want to operate manually. Step 2] Press the Source Device Input button and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).
ProScaler Step 2] Press the INFO button. The Device LED will blink number of times indicating the number of each digit of the Setup Code number. Each digit is separated by 1 second interval of the LED being turned off. For example: One blink, three blinks and eight blinks indicate the code number 138. Tip: Ten blinks are equal to the number “0”. 2 Programming the remote with Learning Method All buttons in 7 Device modes can learn except the LIGHT button. -.
ProScaler High Definition Video Processor User’s Manual C. To Erase All the Learned Commands in One Device Mode Step 1] Press the Source Device Input button and the ENT buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period). Step 2] Press the Source Device Input and Pause buttons simultaneously and hold for 5 seconds until the LED blinks two times.
ProScaler B. Erasing the Macro Commands Step 1] Press the Source Device Input button and the MUTE buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period). Step 2] Press the Macro button you wish to erase commands.
ProScaler High Definition Video Processor User’s Manual 4 OSD Control “Punch Through” You can program the remote control so that SAT or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, OK and 4 Cursor buttons) will also operate in other modes on the remote control. Step 1] Press the Source Device Input button and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).
ProScaler Advanced Functions Advanced Functions A new set of controls is now available for advanced users and calibration professionals. They are located in the “Settings” menu under “Advanced Controls.” The ProScaler design concept is to create a product that automatically adjusts and configures itself for the variety of video formats, color spaces, signal levels. The consumer electronics industry has specified a number of methods by which products communicate with each other for self-configuration.
ProScaler High Definition Video Processor User’s Manual Underscan The Underscan control has not changes from Firmware v1.0. But Underscan is effected by Safe Mode as mentioned on the previous page. Output Color Space The Output Color Space control provides 4 choices for output color space. If you are unsure what to use, Auto is the safe choice. Auto: usually output color space will be RGB RGB: Red, Green, Blue color space standard using 8 bits per primary color.
ProScaler The menu user window lets you control PReP for standard definition (480p or 576p) or high definition (1080p). Auto: PReP will be enabled when AUTO is selected and the input format is 480p or 576p. If this window was entered from the 1080p selection in the previous window, then PReP will be enabled when AUTO is selected and the input format is 1080p. Off will disable PReP for the selected input format.
ProScaler High Definition Video Processor User’s Manual Component Input Component Input menu gives you control over the analog component inputs. To use this control, you must select Component 1 or Component 2, otherwise, this menu item will be grayed out. The Component Inputs window gives you 3 options for controlling Automatic Gain Control on Analog Inputs: Single Sync: This is the default setting. Most component inputs will have sync on the Y signal and should use Single Sync.
ProScaler Device Codes Code Tables AV Receivers and Audio Processors Manufacturer/Brand ADC ADCOM AIWA AKAI AMC ANGSTROM ANTHEM ARCAM ATLANTIC TECHNOLOGY AUDIO FILE AUDIO MATRIX AUDIO TECHNICA B&K BOSE BOSTON ACOUSTICS BRIX CARVER CINEMA SOUND CITATION CLARION DELPHI DENON ELAN ENLIGHTENED AUDIO ESCIENT FISHER FLEXTRONICS FOSGATE AUDIONICS GE GOLDSTAR HARMAN KARDON HITACHI INTEGRA JAMO JCPENNEY JENSEN JVC KENWOOD KLH KOSS KRELL KYOCERA LEXICON Set-Up Code Number 007 082 092 225 161 269 355 356 170 018 104
ProScaler High Definition Video Processor AV Receivers and Audio Processors continued LINN LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MERIDIAN MITSUBISHI MONDIAL MYRYAD NAD NAKAMICHI NEC NIRO NILES ONKYO OPTIMUS OUTLAW PANASONIC PARASOUND PHILIPS PIONEER POLKAUDIO PROCEED RCA REALISTIC ROTEL RUSSOUND SAMSUNG SANSUI SANYO SCOTT SHARP SHERWOOD SIRIUS SONY SOUNDESIGN SSI SUNFIRE TEAC TECHNICS THETA DIGITAL TOSHIBA XM SATELLITE RADIO YAMAHA ZENITH 38 124 377 137 139 052 165 115 004 009 056 086 164 152 208 006 028 0
ProScaler Audio – Satellite Radios Manufacturer/Brand BRIX DELPHI POLKAUDIO SIRIUS XM SATELLITE RADIO Set-Up Code Number 555 515 515 555 515 Blu-ray & HD DVD Manufacturer/Brand LG PANASONIC PIONEER SAMSUNG SONY TOSHIBA Set-Up Code Number 004 002 003 005 001 006 CD Players (no dedicated remote button is provided; see programming method 1C) Manufacturer/Brand Set-Up Code Number ADCOM 062 042 AIWA 089 170 187 AKAI 202 AMC 231 232 ARCAM 238 AUDIO ACCESS 119 147 AUDIO EASE 165 AUDIO TECHNICA 046 CALIFORNIA A
ProScaler High Definition Video Processor CD Players continued LUXMAN MAGNAVOX MARANTZ MCINTOSH MEMOREX MISSION MITSUBISHI MONDIAL MYRYAD NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PROCEED PROTON QUASAR RCA REALISTIC ROTEL SAE SANSUI SANYO SHARP SHERWOOD SIGNATURE SONY SOUNDESIGN SUMO SYLVANIA SYMPHONIC TANDY TEAC TECHNICS THETA VICTOR WARDS YAMAHA 40 011 028 070 249 252 044 107 041 044 051 077 107 209 246 212 247 010 044 107 179 147 244 155 258 178 217 218 062 046 044 1
ProScaler Video Cassette Recorders (VCR) Manufacturer/Brand AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR HARMAN KARDON HITACHI INSTANTREPLAY JCL JCPENNEY JENSEN JVC KENWOOD LG LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH Set-Up Code Number 034 161 016 146 043 046 124 125 072 145 012 023 039 043 035 037 129 028 145 108 003 040 135 145 041 111
ProScaler High Definition Video Processor Video Cassette Recorders (VCR) continued NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054 ORION 025 PANASONIC 066 070 145 083 133 140 157 163 074 167 PENTAX 013 020 145 063 PHILCO 145 034 067 PHILIPS 145 067 034 101 054 071 156 PILOT 101 PIONEER 021 013 048 PORTLAND 108 PULSAR 072 QUARTZ 002 014 QUASAR 066 145 075 RADIO SHACK 123 RCA 107 109 144 147 158 041 145 013 020 140 034 040 REALISTIC 003 008 010 014 145 034 040 053 054 101 RICO 058 RUNCO 148 SALORA 014
ProScaler Video Cassette Recorders (VCR) continued VIDEOSONIC WARDS YAMAHA ZENITH 040 003 013 017 024 145 034 040 053 054 131 012 034 039 043 072 056 048 101 034 058 VCR-TV/VCR Combos Manufacturer/Brand DAEWOO EMERSON FUNAI GOLDSTAR HITACHI JCPENNEY LG LLOYD MAGNAVOX MEMOREX PANASONIC PHILIPS RADIO SHACK RCA SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH Set-Up Code Number 005 117 153 034 101 123 034 101 101 123 034 034 067 101 070 167 034 067 123 034 101 057 154 067 034 034 034 PVR, TIVO Manufacturer/Bran
ProScaler High Definition Video Processor AUX – PC & iPod Manufacturer/Brand Set-Up Code Number APPLE 401 412 BOSE 409 DLO 418 GRIFFIN 471 IPORT 419 KENSINGTON 406 SONACE 419 TEN TECHNOLOGY 401 AUX – Media PC Manufacturer/Brand DELL GATEWAY HAUPPAUGE HP KEYSPAN SONY TOSHIBA WINBOOK Set-Up Code Number 261 262 261 262 294 295 261 262 297 261 262 261 262 261 262 AUX – Gaming Systems Manufacturer/Brand MICROSOFT / XBOX SONY / PS2 Set-Up Code Number 408 107 414 AUX – Lighting Manufacturer/Brand LITE-TOUCH L
ProScaler TV Manufacturer/Brand ABEX ADMIRAL ADVENT ADVENTURA AKAI A MARK AMPRO AMSTRAD ANAM AOC APEX DIGITAL ASTAR AUDIOVOX BARCO BELCOR BELL&HOWELL BLAUPUNKT BROKSONIC BROCKWOOD CAIRN CANDLE CAPEHART CELEBRITY CENTURION CETRONIC CITIZEN CLASSIC CLP CLASSIC COLORTYME CONCIERGE CONCERTO CONTEC CORNEA CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DELL DIMENSIA DREAMVISION DUKANE DUMONT Set-Up Code Number 025 072 251 161 160 247 002 197 146 248 473 474 475 112 143 167 073 157 183 052 043 054 056 080
ProScaler High Definition Video Processor User’s Manual TV continued DURABRAND DWIN DYNASTY DYNATECH DYNEX EIKI ELECTROBAND ELECTROGRAPH ELECTROHOME ELEKTRA ELEMENT EMERSON ENVISION ESA FISHER FUJITSU FUNAI FUTURETECH GATEWAY GE GIBRALTAR GOLDSTAR HALL MARK HAIER HANNSPREE HISENSE HITACHI HP HUMAX ILO INFINITY INFOCUS INTEQ INSIGNIA JANEIL JBL JCB JCPENNEY JENSEN JVC KAWASHO KEC KENWOOD KLEGG KLOSS KMC 46 096 177 257 043 062 400 187 070 466 143 024 076 196 072 363 494 526 028 048 043 155 005 197 004 047
ProScaler TV continued KNOLL SYSTEMS KONKA KREISEN KTV KURAZAI LG LODGENET LOEWE LOGIK LUXMAN LXI MAGNAVOX MAJESTIC MARANTZ MATSUI MAXENT MEGATRON MEMOREX METZ MGA MIDLAND MINERVA MINUTZ MITSUBISHI MONTGOMERY WARD MTC NAD NEC NET TV NIKEI NIKKO NIKO NORCENT NUVISION OLEVIA ONKING ONWA OPTIMUS OPTONICA OPTOMA ORION PANASONIC PHILCO PHILIPS PILOT PIONEER 230 457 530 043 197 143 154 072 113 116 102 004 106 112 119 127 143 243 284 363 072 164 072 004 166 007 138 052 251 160 164 164 059 197 003 060 061 004 063
ProScaler High Definition Video Processor TV continued POLAROID PORTLAND PROSCAN PROTON PROTRON PROVIEW PULSAR QUASAR RADIO SHACK RCA REALISTIC REVOLUTION HD ROCTEC RUNCO SAMPO SAMSUNG SAMSUX SANSUI SANYO SCEPTRE SCOTCH SCOTT SEARS SELECO SHARP SHOGUN SIEMENS SIGNATURE SIMPSON SOLE SONY SOUNDESIGN SOYO SPECTRICON SPECTRONIQ SSS SUPRA SUPRE SUPREME SVA SYLVANIA SYNTAX OLEVIA TANDY TATUNG TECHNICS TECHWOOD 48 323 328 353 354 356 457 494 505 004 143 144 160 161 165 167 004 112 058 143 171 172 193 498 499 494
ProScaler TV continued TEKNIKA TELEFUNKEN TELERENT TERA TMK TOSHIBA TOTEVISION TRUTECH UNIVERSAL VICTOR VIDEO CONCEPTS VIDIKRON VIDTECH VIEWSONIC VIKING VIORE VISCO VITO WARDS WESTINGHOUSE YAMAHA YORK YUPITERU ZENITH ZONDA 002 003 004 024 028 043 072 101 143 037 046 072 172 004 138 030 007 040 062 101 325 230 143 529 008 009 038 146 174 164 188 192 342 004 242 433 002 472 526 363 004 008 009 019 028 060 061 063 064 072 074 143 164 034 076 280 070 197 004 370 004 043 073 072 095 103 157 183 243 284 112 Cab
ProScaler High Definition Video Processor Cable Boxes continued COGECO COMCAST COMSAT COX DIGITAL DIGEO EAGLE EASTERN GEMINI GENERAL INSTRUMENT GNC GOLDEN CHANNEL HAMLIN HITACHI INSIGHT JERROLD MAGNAVOX MASSILLON MEDIACOM MEMOREX MOTOROLA MOVIE TIME MOXI NCTC NSC OAK PACE PANASONIC PARAGON PHILIPS PIONEER PULSAR QUEST RCA RCN REGAL REGENCY RODGERS SAMSUNG SCIENTIFIC ATLANTA SEREN SERVICE ELECTRIC SHAW SIGECOM SONY SPRUCER STARCOM 50 074 043 074 110 074 043 074 111 020 030 040 057 008 074 103 104 099 030 0
ProScaler Cable Boxes continued STARGATE SUSQUEHANNA TIME WARNER TOCOM TOSHIBA UNITED CABLE VERIZON VIDEOTRON WIDE OPEN WEST ZENITH 008 030 104 043 074 043 074 039 040 056 052 004 053 110 043 043 099 052 060 093 100 Satellite Boxes Manufacturer/Brand CABLEVISION DIRECTV DISH NETWORK ECHOSTAR EXPRESSVU GENERAL ELECTRIC GENERAL INSTRUMENT GOI HITACHI HTS HUGHES JVC LG MITSUBISHI MOTOROLA NEXT LEVEL PANASONIC PHILIPS PROSCAN RADIOSHACK RCA SAMSUNG SKY SONY STAR CHOICE TOSHIBA VOOM ZENITH Set-Up Code Number
ProScaler High Definition Video Processor DVD Manufacturer/Brand Set-Up Code Number AIWA 146 AKAI 281 ALPINE 098 APEX DIGITAL 087 111 115 BROKSONIC 130 CINEVISION 091 COBY 260 CYBERHOME 271 DENON 138 080 173 DURABRAND 091 DVD 2000 017 EMERSON 091 143 ESA 143 FISHER 147 FUNAI 143 GE 026 027 GO VIDEO 137 091 220 221 222 GOLDSTAR 091 HARMAN KARDON 084 140 HITACHI 101 ILO 268 INITIAL 111 INSIGNIA 143 INTEGRA 142 180 JBL 084 JVC 012 KENWOOD 151 KISS 279 KLH 135 KRELL 104 LEXICON 148 LG 091 057 074 LITEON 264 265
ProScaler DVD continued OPTIMUS ORION PANASONIC PHILIPS PHILIPS-MAGNOVOX PIONEER POLAROID POLK AUDIO PROCEED PROSCAN RCA RJTECH SAMSUNG SANSUI SANYO SEARS Sensory Science SHARP SONY SUPERSCAN SV2000 SYLVANIA SYMPHONIC TATUNG TEAC TECHNICS TECHWOOD THOMPSON TOSHIBA VENTURER X-BOX YAMAHA ZENITH 107 130 021 042 138 144 150 001 083 095 105 166 035 001 023 092 099 107 108 131 233 035 001 086 026 027 026 027 269 056 165 170 137 159 154 147 130 222 094 033 118 145 126 191 143 143 143 143 102 107 042 088 026 027 0
ProScaler High Definition Video Processor DVD Recorders Manufacturer/Brand CYBERHOME GO VIDEO ILO KISS LITEON PANASONIC SENSORY SCIENCE SONY TOSHIBA Set-Up Code Number 271 220 221 222 268 279 265 138 222 191 188 DVD-TV/DVD Combos Manufacturer/Brand AIWA AKAI DURABRAND ESA FUNAI INSIGNIA MAGNAVOX MINTEK SAMSUNG SV2000 SYLVANIA SYMPHONIC TOSHIBA Set-Up Code Number 146 281 143 143 143 143 282 282 165 143 143 143 130 DVD-TV/DVD/VCR Combos Manufacturer/Brand EMERSON INSIGNIA MAGNAVOX PANASONIC SUPERSCAN SYLV
ProScaler DVD-DVD/VCR Combos Manufacturer/Brand GO VIDEO PANASONIC PHILIPS SAMSUNG SANSUI SONY TOSHIBA ZENITH Set-Up Code Number 137 150 105 (VCR Functions for VCR 067) 137 159 154 145 191 141 091 (VCR Functions for VCR101) 55
D i s t ri b u t ed worl d wi d e b y Su miko 2431 Fif t h S t . Be r k e le y . C A 94710 Te l: 510. 843.4500 . Fa x : 510. 843. 7120 © 2 010 W o l f C i n e m a www.wolfcinema.
