Quick Start Guide

Oven Operation
For complete information on the operation and maintenance
of your Wolf product, refer to the use & care guide.
CAUTION
Do not place cookware on the oven oor or use
aluminum foil or other material to line the oven oor or
side walls. Failure to adhere to this notice will damage
the porcelain interior and will void your warranty.
PRIOR TO USE
To ensure all residual oil from the manufacturing process has
been removed, each oven must go through the following
procedure.
1 Clean range surface and oven thoroughly with hot water
and a mild detergent. Rinse and dry with a soft cloth.
2 Turn on ventilation. Some smoke and odor is normal.
3 Rotate selector bezel to ROAST and adjust temperature
to 550°F for one hour.
4 Rotate bezel to OFF and allow oven to cool with the door
closed.
SETTING CLOCK
1 Touch CLOCK on the control panel.
2 Use up and down arrows to set time of day. Time will
change from am to pm by passing 12:00.
3 Touch CLOCK. An audible chime indicates time has been
set.
4 To change to 24-hour clock, press and hold CLOCK for
5 seconds. Touch CLOCK, then ENTER.
To enable/disable clock standby power, touch and hold
CLOCK for 5 seconds. Touch STOP TIME to toggle on or off,
then touch ENTER.
SETTING TIMER
1 Touch TIMER on the control panel.
2 Use up and down arrows to set time in hours and minutes.
3 Touch TIMER to start. An audible chime indicates timer
has been set.
4 Oven will chime and time will ash when complete. Timer
will continue to chime until CLEAR is touched.
Dual Fuel Range Quick Start Guide
SETTING OVEN CONTROLS
1 Rotate oven knob selector bezel to desired cooking mode.
A preset temperature will appear on the control knob.
2 Open the control panel by pressing .
3 Select preset temperature by touching ENTER or turn the
control knob to increase or decrease temperature. Oven
indicator light illuminates and preheat begins.
To change temperatures from Fahrenheit to Celsius, touch
and hold CLOCK for 5 seconds. Touch COOK TIME to alter-
nate between °F and °C, then touch ENTER.
SETTING CONTROLS FOR PROOF (30"/36" OVEN)
1 Rotate selector bezel to BAKE.
2 Turn oven control knob left until ‘PrF’ is displayed, then
release.
3 Touch ENTER to select preset temperature of 85°F or turn
control knob to change temperature.
SETTING CONTROLS FOR TEMPERATURE PROBE
1 Rotate selector bezel to desired cooking mode.
2 Touch ENTER to select preset temperature or turn control
knob to change temperature.
3 Insert probe into the thickest area of food. When making
bread, cook approx 10 minutes before inserting probe.
4 When preheat is complete, use a pot holder to lift probe
receptacle cover, then insert probe.
5 Touch ENTER to select preset temperature of 160°F or
turn control knob to change temperature.
6 An audible chime indicates internal temperature has
reached probe set point. Remove, then reinsert probe to
verify internal temperature.
SETTING CONTROLS FOR SELF-CLEAN
For 4-hour self-clean:
1 Rotate selector bezel to CLEAN.
2 Touch ENTER.
For 3-hour self-clean:
1 Rotate selector bezel to CLEAN.
2 Touch STOP TIME.
3 Touch down arrow to reduce stop time by 1 hour.
4 Touch ENTER twice.