Use and Care Guide
wolfappliance.com | 21
Troubleshooting
Troubleshooting
OPERATION
Oven does not operate.
• Verify power is on.
• Verify electrical power to the oven and home circuit
breaker is on.
Oven temperature issue.
• Contact Wolf Customer Care at 800-222-7820 for
recommendations.
No response from the control panel touch pads.
• Unit is in Sabbath mode (
is displayed on the control
panel), refer to page 15.
• Turn the circuit breaker o for 20 seconds, then turn
back on.
“Probe Shorted” is displayed on the control panel.
• Touch O. Verify the probe connector is fully seated
into the receptacle. Reset the oven temperature and
probe temperature.
Error message is displayed during clean cycle.
• For double ovens, if one oven is in an active clean
cycle, the other oven can not be used.
Oven “pops” or “bangs” during preheat or cool down.
• Normal with new oven cavity expansion and contrac-
tion.
• Run a clean cycle. If it persists, contact Wolf Customer
Care at 800-222-7820.