DOWNDRAFT VENTILATION USE & CARE GUIDE
SAFETY PRECAUTIONS DOWNDRAFT VENTILATION Contents Customer Care IMPORTANT INSTRUCTIONS 2 Safety The model and serial number are printed on the enclosed product registration card. Both numbers are also listed on the product rating plate. Refer to page 3 for rating plate location. For warranty purposes, you will also need the date of installation and name of your authorized Wolf dealer. Record this information below for future reference.
SAFETY PRECAUTIONS DOWNDRAFT FEATURES IMPORTANT INSTRUCTIONS Downdraft Features GENERAL SAFETY PRECAUTIONS • Do not repair or replace any part of this appliance unless specifically recommended in this guide. All other service should be performed by a qualified technician. • To avoid motor bearing damage and noisy or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.
DOWNDRAFT OPERATION CARE RECOMMENDATIONS Downdraft Operation Filter Removal CONTROL MODULE CONTROL MODULE BUTTONS 1 To activate the downdraft, press the button. The drowndraft chimney will elevate and the blower will turn on automatically to low speed. Refer to the illustration below. adjust the blower speed, press the , or button. The corresponding LED will illuminate to indicate blower setting.
TROUBLESHOOTING Troubleshooting OPERATION SERVICE Downdraft ventilation system does not operate. • Maintain the quality built into your product by contacting Wolf factory certified service. • Verify power is on. • Verify electrical power to unit and home circuit breaker is on. • When contacting service, you will need the model and serial number of your product. Both numbers are listed on the product rating plate. Refer to page 3 for rating plate location.
WOLF APPLIANCE, INC. PO BOX 44848 MADISON, WI 53744 USA WWW.WOLFAPPLIANCE.