Design Guide

138 | Wolf Customer Care 800.222.7820
Planning Information
Wolf cooktop ventilation hoods are recommended for
use with Wolf induction, electric and gas cooktops, and
modules. For ranges and rangetops, a Wolf pro ventilation
hood is recommended.
These hoods have a telescopic chimney flue. A flue exten-
sion is available through an authorized Wolf dealer.
Installation of the cooktop hood should be 24"
(610) to
36"
(914) from the bottom of the hood to the countertop.
Wall and island hoods require an internal, in-line, or remote
blower assembly, avail able through an authorized Wolf
dealer. For local dealer information, visit the find a show-
room section of our website, wolfappliance.com. Refer to
Ventilation Suggestions on pages 158–161. Cooktop hoods
have a vertical discharge with 6"
(152) round duct.
Consult a qualified HVAC professional for specific installa-
tion and ducting applications.
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes.
For wall hoods, locate the electrical supply within the
shaded area shown in the illustration below. For island
hoods, locate the electrical supply on the ceiling inside the
top of the hood. A separate circuit servicing only this appli-
ance is required.
ELECTRICAL REQUIREMENTS
Electrical Supply grounded, 110/120 VAC, 60 Hz
Service 15 amp dedicated circuit
E
18"
(457)
24"
(610) TO 36" (914) BOTTOM EDGE TO COUNTERTOP
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
Electrical location for all wall hoods
Cooktop Ventilation Hoods