Use and care guide

wolfappliance.com | 13
Temperature Probe
The temperature probe measures the internal temperature
of food while cooking. It can be used with all cooking
modes except broil and convection broil.
Setting controls:
1 Rotate mode selector knob to desired cooking mode.
2 Touch ENTER to select preset temperature or turn tem-
perature control knob to change temperature.
3 Insert probe into the thickest area of food. When making
bread, cook for approximately 10 minutes before
inserting probe.
4 When preheat is complete, use a pot holder to lift probe
receptacle cover, then insert probe. Refer to the illustra-
tion below.
5 Probe temperature is preset to 160°F (70°C). Touch
ENTER to select preset temperature or turn temperature
control knob to change temperature. Display alternates
between oven set temperature and actual probe temper-
ature. To alternate between probe set point and actual
probe temperature, press PROBE. Temperatures below
70°F
(20°C) are displayed as ‘Lo.’
6 An audible chime indicates internal temperature has
reached probe set point. Remove, then reinsert probe to
verify internal temperature.
CAUTION
Probe and probe receptacle will be very hot. Handle
with care.
OVEN OPERATION
Proof
Setting controls:
1 Rotate mode selector knob to BAKE.
2 Turn temperature control knob left until ‘PrF’ is dis-
played, then release.
3 Oven temperature is preset to 85°F (30°C). Touch ENTER
to select preset temperature or turn temperature control
knob to change temperature. Display alternates between
set temperature and ‘PrF.’
Dehydration
Accessory kit required. Accessories are avail able through an
authorized Wolf dealer. For local dealer information, visit the
nd a showroom section of our website, wolfappliance.com.
Setting controls:
1 Place door stop supplied with accessory kit, onto oven
door lock.
2 Rotate mode selector knob to CONV.
3 Turn temperature control knob left until ‘dEH’ is dis-
played, then release.
4 Oven temperature is preset to 110°F (45°C). Touch
ENTER to select preset temperature or turn temperature
control knob to change temperature. Display alternates
between set temperature and ‘dEH.’
Probe receptacle.