L S E R I E S B U I LT - I N O V E N S I NSTALLATION I NSTRUCTIONS
C O N TA C T I N F O R M AT I O N Wolf Customer Service: 800-332-9513 Website: wolfappliance.com As you follow these instructions, you will notice WARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Wolf equipment. There are two types of potential hazards that may occur during installation. signals a situation where minor injury or product damage may occur if you do not follow instructions.
W O L F L S E R I E S B U I LT- I N OV E N S I N S TA L L AT I O N R E Q U I R E M E N T S S I T E P R E PA R AT I O N IMPORTANT NOTE: This installation must be completed by a qualified technician. IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. IMPORTANT NOTE: Save these Installation Instructions for the local inspector’s use.
W O L F L S E R I E S B U I LT- I N OV E N S 30" (762) SINGLE OV E N MODELS SO30F AND SO30U I N S TA L L AT I O N O P T I O N S IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. The Wolf 30" (762) single oven may be installed below a Wolf 30" (762) electric or gas cooktop.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S MODELS SO30F AND SO30U Overall Width 29 7/8" (759) Minimum Cabinet Width 30" (762) Overall Height 27 1/2" (699) Minimum Cabinet Depth 24" (610) Overall Depth 24" (610) Opening Width 28 1/2" (724) 20 3/4" (527) Opening Height 27 3/16" (691) Door Clearance Recommended Cabinet Width 33" (838) Minimum Base Support 250 lbs (113 kg) 33" (838) RECOMMENDED CABINET WIDTH 30" min (762) E 24" min (610)
W O L F L S E R I E S B U I LT- I N OV E N S 36" (914) SINGLE OV E N MODEL SO36U I N S TA L L AT I O N O P T I O N S IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. The 36" (914) single oven may be installed below a Wolf 36" (914) electric or gas cooktop.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S MODEL SO36U Overall Width 35 5/8" (905) Minimum Cabinet Width 36" (914) Overall Height 24 3/8" (619) Minimum Cabinet Depth 24" (610) Overall Depth 24" (610) Opening Width 34 1/2" (876) 17 3/4" (451) Opening Height 24 1/16" (611) Door Clearance Recommended Cabinet Width 39" (991) Minimum Base Support 250 lbs (113 kg) 39" (991) RECOMMENDED CABINET WIDTH 36" min (914) E 24" min (610) 24 1/16"
W O L F L S E R I E S B U I LT- I N OV E N S 30" (762) DOUBLE OV E N MODELS DO30F AND DO30U IMPORTANT NOTE: A minimum 24" (610) of usable cabinet depth is required, or the back panel of the cabinet may need to be removed for proper installation. The electrical box must be flush with the back panel of the cabinet. IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in an adjacent cabinet within reach of the conduit.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S MODELS DO30F AND DO30U Overall Width 29 7/8" (759) Minimum Cabinet Width 30" (762) Overall Height 50" (1270) Minimum Cabinet Depth 24" (610) Overall Depth 24" (610) Opening Width 28 1/2" (724) 20 3/4" (527) Opening Height 49 5/8" (1260) Door Clearance Recommended Cabinet Width 33" (838) Minimum Base Support 400 lbs (181 kg) 33" (838) RECOMMENDED CABINET WIDTH 30" min (762) E 24" min (610) OP
W O L F L S E R I E S B U I LT- I N OV E N S I N S TA L L AT I O N S P E C I F I C A T I O N S I N S TA L L A T I O N O P T I O N S The Wolf 30" (762) single oven may be installed in combination with a Wolf nonconvection or convection microwave oven with 30" (762) trim kit and a 30" (762) warming drawer with stainless steel or integrated drawer front. Refer to the illustration below, and pages 4–5 for installation specifications for the 30" (762) single oven.
I N S TA L L AT I O N I N S T R U C T I O N S U N PAC K T H E O V E N Oven is not mounted to the shipping base. Do not remove banding until the oven is at the point of installation. Keep the bottom foam in place when moving or carting the oven. The bottom foam also protects the factory-installed trim. Do not remove the bottom foam until oven has been positioned next to the installation opening. Cut the plastic straps and remove the two V-boards. Remove the four top foam corners and the corner posts.
W O L F L S E R I E S B U I LT- I N OV E N S ELECTRICAL R E Q U I R E M E N T S Verify that power is disconnected from electrical box before proceeding. I M P O R TA N T N OT E You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Maximum connected load: 5.1 kW for 30" (762) and 36" (914) single ovens; 8.9 kW for the double oven.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L I N G T H E O V E N FOUR-WIRE ELECTRICAL SYSTEM To connect to a four-wire electrical system, follow these steps: Separate the ground and white appliance wires. Connect the white appliance wire to the neutral (white) supply wire in the electrical box. Connect the black appliance wire to the black (L1) power supply wire in the electrical box. Connect the red appliance wire to the red (L2) power supply wire in the electrical box.
W O L F L S E R I E S B U I LT- I N OV E N S I N S TA L L I N G T H E O V E N M O U N T OV E N TO C A B I N E T Once the oven is fully inserted into the cabinet opening, locate the mounting holes on the oven side trim. There will be four for a single oven and six for a double oven. Refer to the illustration below. Use a 1/16" drill bit to drill pilot holes into the cabinet. Use the provided wood screws to secure the oven to the cabinet through the oven mounting holes.
I N S TA L L AT I O N I N S T R U C T I O N S TROUBLES H O OT I N G I F Y O U N E E D S E RV I C E IMPORTANT NOTE: If the built-in oven does not operate properly, follow these troubleshooting steps: If service is necessary, maintain the quality built into your built-in oven by calling a Wolf authorized service center. Verify that power is being supplied to the oven. To obtain the name and number of a Wolf authorized service center, check the Constant Care section of our website, wolfappliance.
WOLF APPLIANCE, INC. 811577 7 / 2007 P. O . B O X 4 4 8 4 8 MADISON, WI 53744 800-332-9513 W O L FA P P L I A N C E .
