Installation Guide

6 | Wolf Customer Care 800.222.7820
INSTALLATION
Installation
WARNING
Wall framing must be able to support the weight of the
hood and internal blower, if applicable.
1 Refer to the illustration below for typical wall framing.
C
L
5"
(127)
10
3
/4
"
(273)
BACK PANEL
MOUNTING
HOLE
BLOCKING MOUNTING
HOLE
Wall framing (typical)
Hood Preparation
Remove the lters prior to installation. Remove the center
lter rst, if applicable. To remove, press the lter upward,
then rotate the bottom downward. Refer to the illustration
below.
Filters