Installation Guide

wolfappliance.com | 9
INSTALLATION
LIGHT BULB
CHANGER
Light bulb
Filters
Complete the Installation
FILTERS
Orient the lters with the lines running vertically. To install,
place the top edge of the lter against the spring, press
upward and rotate the bottom into position. Slide the outer
lters over to reinstall the center lter, if applicable. Refer to
the illustration below.
LIGHT BULBS
A suction-cup-style light bulb changer is provided with
the hood. To install, use the changer to push the bulb into
the receptacle and rotate counterclockwise one-quarter
turn. Refer to the illustration below.