Installation Guide

6 | Wolf Customer Care 800.222.7820
Ducting
WARNING
To reduce the risk of fire, use only metal ducting.
IMPORTANT NOTE: Consult a qualified HVAC professional
for specific installation and ducting applications.
Pro Wall Hoods accommodate a 10"
(254) round duct. Use
only rigid metal ducting.
A straight, short duct run allows the hood to perform most
eciently. If the duct run exceeds 50'
(15 m), a higher CFM
blower may be required to maintain proper air flow.
Internal and in-line blowers require a roof or wall cap.
Connect ducting to the cap or to the remote blower and
work back towards the hood. Use sheet metal screws and
high-temperature duct tape to seal joints between ducting
sections.
Pro Wall Hoods include a backdraft damper. Local codes
may require the use of an additional backdraft and/or
make-up air damper. Contact your local HVAC professional
for specific requirements.
A make-up air damper is available through an authorized
Wolf dealer. For local dealer information, visit the find a
showroom section of our website, wolfappliance.com.
Specifications