Pro Wall Hoods IG

wolfappliance.com | 11
24"/27" Deep Wall Hood
INSTALLATION
7 Position the mounting brackets on the mounting strip
as shown in the illustration and chart below. Secure the
brackets to the mounting strip with the provided screws
and washers.
MOUNTING BRACKET LOCATION
A
30" (762) Hood 23
1
/2" (597)
36" (914) Hood 24
1
/2" (622)
42" (1067) Hood 30
1
/2" (775)
48" (1219) Hood 36
1
/2" (927)
54" (1372) Hood 42
1
/2" (1080)
60" (1524) Hood 48
1
/2" (1232)
66" (1675) Hood 54
1
/2" (1384)
8
Position the mounting strip on the wall and secure it to
the wall framing with the wood screws provided. Refer to
the illustration below.
9 Lift the hood into position and insert Romex
®
wire(s)
into the electrical knockout and secure with a UL or
C/UL approved connector (not provided).
10 Secure the hood to the mounting strip and wall structure
with the provided screws and washers.
11 Connect the ducting to the transition and secure with
duct sealing tape.
INSTALLATION
C
L
A
MOUNTING
STRIP
MOUNTING
BRACKET
1
/2" (13)
Mounting bracket location
15
1
/8"
(384)
MOUNTING STRIP
Hood installation