Installation Guide

wolfappliance.com | 5
Discharge
Pro Wall Chimney Hoods have a vertical discharge. Refer to
the illustration below.
SPECIFICATIONS
2" (51)
Vertical discharge
Electrical Requirements
Installation must comply with all applicable electrical codes.
Locate the electrical supply as shown in the illustration
below. A separate circuit servicing only this appliance is
required.
ELECTRICAL REQUIREMENTS
Electrical Supply grounded, 120 VAC, 60 Hz
Service 15 amp dedicated circuit
E
6"
(152)
5"
(127)
30" (762) TO 36" (914) BOTTOM EDGE TO COUNTERTOP
Electrical location
Rating plate location
RATING PLATE