use and_care_guide

12 | Wolf Customer Care 800.222.7820
Manual Cooking
POWER LEVEL
The speed oven has ten preset power levels.
To Cook Manually at 100% Power:
1 Use the number pads to enter the desired cook time.
2 Touch Start.
3 The oven chimes and “END” appears on the control
panel display when complete.
To cook manually at a power level less than 100%, touch
Power Level, then use the number pads to select the
desired power level. Refer to the chart below.
POWER LEVEL
POWER LEVEL High 100%
POWER LEVEL, 9 90%
POWER LEVEL, 8 80%
POWER LEVEL, 7 Medium High 70%
POWER LEVEL, 6 60%
POWER LEVEL, 5 Medium 50%
POWER LEVEL, 4 40%
POWER LEVEL, 3 Medium Low | Defrost 30%
POWER LEVEL, 2 20%
POWER LEVEL, 1 Low 10%
OVEN OPERATION
MULTIPLE SEQUENCE COOKING
The speed oven can be programmed for up to four auto-
matic cooking sequences, switching between modes,
temperatures, and power levels automatically (e.g. start at
100%, then switch to 50% power).
To Use Multiple Sequence Cooking:
1 Touch Power Level and enter the desired power level for
the rst cooking sequence (for 100%, touch Power Level
a second time), then use the number pads to enter the
desired cook time.
2 Touch Power Level, then touch 5, then use the number
pads to enter a second cook time.
3 Touch Start.
ADD MINUTE
The Add Minute feature cooks for one minute at 100%
by touching Add Minute. Touch multiple times to increase
the cook time. Each touch increases the cook time by one
minute. This feature cannot be used with Convection mode
or Sensor Cooking.