Use and Care Guide

wolfappliance.com | 7
Rangetop Operation
Surface Burners
To light a burner, push and turn the corresponding control
knob counterclockwise to Hi. The igniter clicks until the
burner lights. Once lit, continue to turn the knob counter-
clockwise to the desired setting.
To select a simmer setting, turn the control knob to the
detent at the lowest setting. Push and continue to turn
counterclockwise. The flame transitions to the second tier
on the burner. Continue to turn the knob to the desired
simmer setting.
During a power outage, surface burners can be lit manu-
ally. Turn the knob to Hi and light using a multi-purpose
lighter.
SURFACE BURNER RATING
The front left burner is 20,000 Btu. Any additional burners
to the right are 18,000 Btu. The rear left burner is 9,200
Btu. Any additional burners to the right are 15,000 Btu.
CAUTION
Never leave pans on a high setting unattended. Be
careful when cooking food in fat or grease; it can
become hot enough to ignite.
CONTROL KNOBS
ICON CONTROL KNOB SETTINGS
Surface Burner Hi–Lo / Simmer Hi–Lo
Charbroiler Hi
Griddle 100°F–450°F
French Top Hi
Wok Burner Hi–Lo