INSTALLATION GUIDE Sealed Burner Rangetops
Contents Important Note Wolf Sealed Burner Rangetops . . . . . . . . . . . . . . . . . . 3 To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted information throughout this guide: Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sealed Burner Rangetop Specifications . . . . . . . . . . . 5 Sealed Burner Rangetop Installation . . . . . . . . . . . . .
Wolf Sealed Burner Rangetops 3 wolfappliance.com/specs Sealed Burner Rangetop Installation IMPORTANT NOTE: This installation must be completed by a qualified installer, service agency or gas supplier. Wolf Sealed Burner Rangetop Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference.
Safety Instructions 4 IMPORTANT INSTRUCTIONS WHAT TO DO IF YOU SMELL GAS: If the information in this guide is not followed exactly, a fire or explosion may result, causing property damage, personal injury or death. • Do not try to light any appliance. • Do not touch any electrical switch. • Do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s • Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Sealed Burner Rangetop Specifications 5 wolfappliance.
Sealed Burner Rangetop Specifications 6 Installation Requirements VENTILATION Failure to locate the rangetop without the proper clearances will result in a fire hazard. IMPORTANT NOTE: Caution must be used in planning the proper installation of the Wolf sealed burner rangetop to avoid fires or damage to adjacent cabinetry or kitchen equipment. Follow all minimum clearances to combustible surfaces shown in the installation illustration for your specific model on the following pages.
Sealed Burner Rangetop Specifications 7 wolfappliance.com/specs Electrical Requirements ELECTRICAL SHOCK HAZARD: Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions can result in electric shock, fire or death. The Wolf sealed burner rangetop requires a 110/120 V AC, 50/60 Hz electrical supply to operate the electronic ignition system. The service should have its own 15 amp circuit breaker.
Sealed Burner Rangetop Specifications 8 Gas Supply Requirements GAS SUPPLY LINE EXPLOSION HAZARD: Use a certified gas supply line and install a gas shut-off valve. Securely tighten all gas connections. Failure to follow these instructions can result in explosion, fire or death. IMPORTANT NOTE: The sealed burner rangetop must be connected to a regulated gas supply. IMPORTANT NOTE: This installation must conform with local codes and ordinances.
Sealed Burner Rangetop Specifications 9 wolfappliance.com/specs Gas Supply Requirements GAS MANIFOLD PRESSURE • Natural Gas: Standard orifices are set for 5" (12.5 mb) WC (water column). A natural gas pressure regulator is installed. • LP Gas: Standard orifices are set for 10" (25 mb) WC. An LP gas pressure regulator is installed. • Gas Supply Pressure: The maximum gas supply pressure to the regulator should never exceed 14" (34.9 mb) WC; .5 psi (3.5 kPa) for natural and LP gas.
Sealed Burner Rangetop Specifications 10 30" (762) Sealed Burner Rangetop INSTALLATION 13" (330) 30" (762) TO 36" (914) max TO BOTTOM OF VENTILATION HOOD** 18" (457) min 6" (152) TO COMBUSTIBLE* 6" (152) TO COMBUSTIBLE* 7 1/2" (191) 30" (762) OPENING WIDTH 36" (914) 16" (406) PLATFORM GAS AND ELECTRICAL THROUGH BOTTOM OF PLATFORM OPENING HEIGHT FLOOR TO COUNTERTOP PLATFORM PLATFORM 4" TOP VIEW (102) BACK WALL E G 16" (406) *Minimum clearance from rough opening to combustible materials
Sealed Burner Rangetop Specifications 11 wolfappliance.
Sealed Burner Rangetop Specifications 12 48" (1219) Sealed Burner Rangetop INSTALLATION 13" (330) 30" (762) TO 36" (914) max TO BOTTOM OF VENTILATION HOOD** 18" (457) min 6" (152) TO COMBUSTIBLE* 6" (152) TO COMBUSTIBLE* 7 1/2" (191) 48" (1219) OPENING WIDTH 36" (914) 16" (406) PLATFORM GAS AND ELECTRICAL THROUGH BOTTOM OF PLATFORM OPENING HEIGHT FLOOR TO COUNTERTOP PLATFORM 4" TOP VIEW (102) BACK WALL E G 16" (406) *Minimum clearance from rough opening to combustible materials up to 18
Sealed Burner Rangetop Installation 13 wolfappliance.com/specs Install the Rangetop Prepare the finished opening for the rangetop according to dimensions shown in the illustration for your specific model on the previous pages. The platform must be 3/4" (19) thick and include a cut-out at the right rear for electrical and gas supply connections. IMPORTANT NOTE: The platform must be level to ensure that the cooking surface is level. Remove and discard all packing materials from the rangetop.
Sealed Burner Rangetop Installation Verify Rangetop Operation IMPORTANT NOTE: Prior to operating the rangetop, be sure to read the entire Wolf sealed burner rangetops use & care guide included with the rangetop for important safety, service and warranty information. SURFACE BURNERS Turn on the power supply to the rangetop. Place the burner cap on each burner base and position the burner grates before lighting. Surface burners of the sealed burner rangetop use electronic igniters.
Service Information 15 wolfappliance.com/specs Troubleshooting Service Information IMPORTANT NOTE: If the sealed burner rangetop does not operate properly, follow these troubleshooting steps: If service is necessary, maintain the quality built into your sealed burner rangetop by contacting Wolf factory certified service. • Verify that electrical power is being supplied to the rangetop.
WOLF APPLIANCE, INC. P. O. BOX 44848 MADISON, WI 53744 816998 REV-A 1/ 2011 WOLFAPPLIANCE.COM 800.222.
