Quick Start Guide

Rangetop Operation
For complete information on the operation and maintenance
of your Wolf rangetop, refer to the use and care guide.
PRIOR TO USE
To ensure all residual oil from the manufacturing process has
been removed, clean the rangetop surface thoroughly with
hot water and a mild detergent, including the charbroiler,
griddle, French top, and wok (if applicable). Rinse and dry
with a soft cloth. Verify surface burner components are
assembled correctly. Turn on ventilation before operation.
SURFACE BURNERS
1 To light a burner, push and turn the corresponding control
knob counterclockwise to HI. The igniter clicks until the
burner is lit. Once lit, continue to turn the knob counter-
clockwise to the desired setting.
2 To select a simmer setting, turn the control knob to the
detent at the lowest setting. Push and continue to turn
counterclockwise. The ame transitions to the second tier
on the burner. Continue to turn the knob to the desired
simmer setting.
3 When cooking is complete, turn the control knob to OFF.
CAUTION
Never leave pans on a high setting unattended. Be
careful when cooking food in fat or grease; it can
become hot enough to ignite.
CHARBROILER
1 Turn on ventilation and remove the stainles steel cover.
2 Push and turn the control knob counterclockwise to HI.
The charbroiler operates on HI only. The igniter clicks until
the burner is lit.
3 Allow the charbroiler to preheat for 10 minutes.
4 When cooking is complete, turn the control knob to OFF.
WOLFAPPLIANCE.COM
SEALED BURNER RANGETOP QUICK START GUIDE
8/20199033019 REV-A
GRIDDLE
1 Turn on ventilation and remove the stainles steel cover
before operation.
2 Push and turn the control knob counterclockwise to the
desired temperature. The igniter clicks until the burner
is lit. The double griddle has separate controls for each
side.
3 The indicator light above the knob illuminates until the
griddle reaches the set temperature. The light cycles
on and off as more heat is required to maintain the set
temperature.
4 When cooking is complete, turn the control knob to OFF.
FRENCH TOP
1 Turn on ventilation and remove the stainles steel cover
before operation.
2 Push and turn the control knob counterclockwise to HI.
The French top operates on HI only. The igniter clicks
until the burner is lit.
3
Allow the French top to preheat for 30 minutes. Always
use cookware, do not cook food directly on the surface.
4 When cooking is complete, turn the control knob to OFF.
WOK BURNER
The wok burner has a large burner that transfers intense
heat directly to the wok, which is ideal for wok cooking. The
minimum wok size is 14" (356) in diameter. The maximum
wok size is 20" (508) in diameter.
1 Turn on ventilation before operation.
2 Push and turn the control knob counterclockwise to HI.
The igniter clicks until the burner is lit.
3 Once lit, continue to turn the knob counterclockwise to
the desired setting.
4 When cooking is complete, turn the control knob to OFF.
WOK BURNER GRATE
The wok burner grate allows the wok to function as a
large surface burner for at-bottom pots up to 14"
(356) in
diameter.