Use and Care Guide

wolfappliance.com | 3
Safety Precautions
GENERAL SAFETY PRECAUTIONS
• Sucient air is needed for proper combus-
tion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent
back drafting.
• Follow the heating equipment manufacturer’s
guideline and safety standards such as those
published by the National Fire Protection Asso-
ciation (NFPA), the American Society for Heating,
Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
• Do not operate any fan with a damaged cord
or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
• This appliance must be grounded.
CAUTION
For general ventilating use only. Do not use
to exhaust hazardous or explosive materials
and vapors.
• Ducted fans must always be vented to the out-
doors.
• To reduce the risk of fire, use only steel duct-
work.
• Do not wear loose-fitting or hanging clothing
when operating this appliance. It may be ignited
by burners or elements on the cooktop.
• Children should not be left alone or unattended
in the area where this appliance is in use.
CAUTION
To reduce the risk of fire and properly
exhaust air, be certain to duct air outside. Do
not vent exhaust air into spaces within walls
or ceilings or into attics, crawl spaces, or
garages.
IMPORTANT INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
• Read this use and care guide carefully before
using your new ventilation hood to reduce the
risk of fire, electric shock, or injury to persons.
• Ensure proper installation and servicing. This
appliance must be properly installed and
grounded by a qualified technician.
• Warranty service must be performed by Wolf
Factory Certified Service.
• Installation work and electrical wiring must be
done by qualified person(s) in accordance with
all applicable codes and standards, including
fire-rated construction codes and standards.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
a) Use this unit only in the manner intended
by the manufacturer. If you have ques-
tions, contact the manufacturer.
b) Before servicing or cleaning unit, unplug
the appliance or switch power o at
service panel and lock the service discon-
necting means to prevent power from
being switched on accidentally. When
the service disconnecting means cannot
be locked, securely fasten a prominent
warning device, such as a tag, to the ser-
vice panel.