Hood Installation Manual
wolfappliance.com
|
5
Ducting
RECIRCULATING APPLICATION
The hood with an internal blower, can be installed in a recir-
culating application. The air discharge must be a minimum
of 40"
(1016) from every side of the hood. Refer to the illus-
tration below.
Ductwork and vent cover are not provided.
A recirculation kit, available through an authorized Wolf
dealer, is required.
40"
(
1016
)
MIN
Recirculating application
SITE PREPARATION
Filter Removal
To access the grease lters, pull down the front edge of the
bottom panel of the hood and allow it to rotate downward.
To remove the lters, refer to the illustration below.
IMPORTANT NOTE: Do not operate the ventilation hood
without the grease lters.
FILTER
Filter removal