Hood Installation Manual

8 | Wolf Customer Care 800.222.7820
INSTALLATION
BLOWER INSTALLATION
IMPORTANT NOTE: The blower must be installed and
plugged in prior to making the electrical connection to the
hood.
1 Insert the round discharge on the blower into the round
discharge on the blower box.
2 Secure the blower to the blower box with the two screws
provided with the blower. Refer to the illustration below.
3 Rotate the blower box so the 6" (152) round discharge is
properly located. Refer to the illustration below.
4 Secure the blower box to the hood with the existing
screws.
Internal blower installation Discharge direction
Hood Installation—Internal Blower
BLOWER BOX REMOVAL
Remove the blower box from the hood by removing the four
screws. Refer to the illustration below.
Blower box removal