R INSTRUCTIONS VZ-3 ENGLISH Check out our Internet Homepage for additional information www.wolfvision.
ENGLISH Precautions WARNING! Risk of electric shock Dangerous voltage inside Please observe the following: Use this Visualizer only with the correct voltage as shown on the type label ! Do not expose the Visualizer to heat or moisture ! Protect the Visualizer from excessive shocks ! Make sure that sufficient air circulation for cooling the Visualizer is possible (ventilation slots on the back of the tube)! If there is any abnormality (abnormal noise, smell, smoke etc.
Approval Marks on the unit: C Tested to complywith FCC standards for home or office use US L I ST E D 9902476 FCC information: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Components of the Visualizer ZOOM #4 R VISUA LIZER VZ-3 #3 #2 #1 #1 #2 #3 #4 Working surface (see page 7) Connectors (on the back behind the cable cover - see below) Light (maintenance-free LED) Control keys (see next page) Zoom wheel (see next page) Connectors (#2) #7 #6 EXTERN IN USB #8 LAN (PoE+) #5 DVI #5 #6 #7 #8 #9 DVI-I output (see page 8) USB port (see page 7) External Input for Computer RGB-signals (15pin) (see page 9) LAN port 10/100 TBase (see page 7) Power connection PoE+ (see p
Control Keys (camera head) (#4) One of the great features of WolfVision's Portable Visualizers is that only the most necessary keys are on the unit itself. Therefore anyone can use it without instructions: #13 #12 #14 #11 #15 #10 #10 EXTERN key / MENU key / menu: navigation key - down Switches between Visualizer image and external input (for more details - see page 9). Pressing EXTERN key for 2 second activates the on-screen menu (see page 10).
Setting Up the Visualizer 1. Remove cable cover. 2. Connect the power pack to the power-input (#8). 3. Connect your display device (projector, monitor, video conferencing unit etc.) to the appropriate output of the Visualizer (#5, RGB with adapter) and fasten the cable tie. IMPORTANT: For choosing the right output setting please read the detailed description on page 8! 4. Slide-in cable cover until it rasted. 5. Lift the arm upwards. The VZ-3 is switched on automatically.
Focusing / Autofocus Please note that objects with very low contrast (like blank sheet of paper) are difficult to focus. If the autofocus does not work just move the object slightly. For special applications the autofocus can also be switched off using the FOCUS key (#14). To focus manually, keep the FOCUS key pressed for 2 seconds and then adjust the focus with the arrow up/down keys (FREEZE and EXTERN). Press the FOCUS key quicklyto return to normal operation.
USB Port The USB device port (#6) can be used for direct connections between the Visualizer and a computer. This way, a Visualizer can be controlled and can be used as a scanner for 3-dimensional objects. Images in JPG, TIF or BMP format can be taken in a fraction of a second - much faster than with a desktop scanner. WolfVision's Connectivity Software works under Windows XP, Vista and 7 (32 and 64-bit) as well as Apple Macintosh. It is fully TWAIN/WIA compatible.
DVI/RGB Output Choosing the Correct Output Mode The DVI-I output (#5) can output analog and digital signals in following formats: - XGA - SXGA- WXGA* - WXGA - 720p (4:3 - 1024x768 pixels) at 60Hz (4:3 - 1280x960 pixels) at 60Hz (16:10 - 1280x800 pixels) at 60Hz (16:9 - 1360x768 pixels) at 60Hz (16:9 Widescreen HD - 1280x720 pixels) at 50Hz or 60 Hz native resolution native resolution native resolution The "Auto resolution" function is activated by default.
External Input - EXTERN A computer can be connected to the External RGB input (#7) of the Visualizer. By pressing the EXTERN-key (#10) you can switch between the Visualizer image and the image of the external input to be displayed to the audience. The settings of the Visualizer can be changed in the on-screen menu (see page 10). Use supplied cable without choke (ferrit core), other cables may block the hinge mechanically.
The following chapter is for experienced users only: ON-SCREEN MENU / ON-SCREEN HELP For regular use of the WolfVision Visualizer, it is not necessary to go into the Visualizer's menu and change settings. Inexperienced users should not make any adjustments here. To enter the on-screen menu keep pressed the MENU key (EXTERN #10) for 1 second.
MAINTENANCE Cleaning Cabinet: Light: Lens: Clean the cabinet by gently wiping it with a soft, lint free cloth. Clean the light by gently wiping with a soft micro fiber cloth only. Clean the lenses by gently wiping with a soft, lint free cloth (do not use a paper tissue!). Clean by breathing on the lens to create moisture then wipe with a lint free cloth (If need be, use a special optical cleaner only!).
Anti-theft T-bar lock (Kensington® Lock) The Visualizer can be fixed with a security cable T-bar lock, so that it can not be stolen. Follow the instructions from the cable lock manual. slot for lock Fixing the Visualizer onto the table The Visualizer can also be fixed onto a table with the supplied table mounting set in order to minimize the risk of theft. Maximum thickness of the table is 35mm [1.38"] and a free area of at least 620mm x 350mm [24.4" x 18.8"] would be required.
Technical Data Camera / Technology (Signal format) Pictures per second (as picked up by the camera) Effective Pixel Total pixels of CCD Pixels processed per second (=effective pixels x frames per second) Color reproduction (sRGB color precision) Native signal output (camera) Output signals (native and scaled) Resolution (measured) Vertical image-frequency (depending on resolution) Iris / Shutter / Gain (on-screen menu) White balance adjustment Autofocus / Manual Focus On-screen menu and on-screen help Upgra
R CONTACTS Manufacturer / Worldwide Distribution WolfVision GmbH A-6833 Klaus Tel: +43(5523)-52250, Fax: +43(5523)-52249 AUSTRIA E-Mail: wolfvision@wolfvision.com International Distribution Offices USA WolfVision Inc. Duluth (Atlanta) Burlingame (San Francisco) Asia WolfVision Pte Ltd Singapore Tel: +1(770)931-6802, Toll free: 877-873-WOLF, Fax: +1(770)931-9606 E-Mail: sales@wolfvision.us / support@wolfvision.us Tel: +1(650)648-0002, Toll free: 800-356-WOLF, Fax: +1(650)648-0009 E-Mail: sales@wolfvision.
