User manual
USB-PORT
The USB output of the VZ-8plus can be used to transfer
Visualizer images onto a computer in just 2 seconds. No
additional computer hardware (like a grabber card) is required. In
this way the Visualizer can be used as a 3-D scanner for your
computer. Just connect the USB port (#16) of the Visualizer and
the USB port of your computer, using the supplied USB cable.
9-IMAGE MEMORY
Split image of 9 picture memory
A dedicated WolfVision USB-software can be found on the CD-ROM. Please check our Internet
homepage at: www.wolfvision.com/support if an update of this software is available as a
free-download. The software works under Windows 98/ME/2000. Windows XP will also be
supported. Windows 95 and NT will not work, because they do not support USB.
You can store 9 images and recall them by just pressing
one of the numerical keys (#29) on the infrared remote control:
Storing an image: Press one of the memory keys (#29)
for more than 2 seconds
Recalling an image: Press one of the memory keys (#29)
quickly
By pressing the "All" key (#27) a split image with all 9 pictures
of the memory can be displayed.
If you would like to fill all 9 memories quickly (e.g. with your company logo or a black image)
just press the ALL key (#27) for 4 seconds. Then a new picture is stored every second until the
memory is full.
The VZ-8plus is equipped with a memory backup battery. It stores the pictures in the memory
when the power supply is disconnected for 1-4 weeks.
A
A
A
A
Working surface:
Output picture:
Normal mode:
Image turn mode:
Only 50% of the
pixels are used to
pick up the letter
90% of the pixels
are used to pick
up the letter
IMAGE TURN MODE (for higher resolution)
Picking up a complete vertical (portrait) letter
or A4 page has always been a critical issue for
a Visualizer, because the image is always
picked up in a horizontal (landscape) format.
So the camera could only use 50% of its pixels
to pick up a vertical (portrait) page. WolfVision's
new "Image turn" mode solves this problem.
Just place your letter (or other vertical object)
ยบ
on the working surface horizontally and zoom
in on it completely, so that about 90% of the pixels of the built-in camera are used to pick
up the letter. Then press the IMAGE TURN key (#22). The Visualizer turns the picture
electronically 90 and outputs it the right way up with much higher resolution than in
normal mode. The left and right margins are black.
8