Instructions

~ 60 ~
2
FLAT PART OF THE PLASTIC FRAME OF THE CARBON FILTER
3
GAP TO INSERT THE CARBON FILTER
4
HOUSING OF THE EXTRACTOR HOOD
5
MOTOR HOUSING
2. If you want to replace the carbon filter (see also chapter 6.2 REPLACING OF THE
CARBON FILTER), pull it out of the gap carefully and replace it by a new one.
WARNING! Always ensure that the carbon filter is inserted properly.
NOTICE! The suction capacity is decreased by an installed carbon filter.
NOTICE! Depending on frequency of use, replace the carbon filter every
three to six months. Clean the grease filter(s) regularly for proper operation
of the motor (s. chapter CLEANING AND MAINTENANCE).
3.2 Grease filter(s)
Always ensure that the grease filter(s) is / are inserted properly.
Clean the grease filter(s) regularly (s. chapter CLEANING AND MAINTENANCE).
WARNING! Operate the appliance with inserted grease filters only.
Otherwise, recirculating-transported fat will deposit in the appliance and
the exhaust system. RISK OF FIRE!
4. Control panel and operation
4.1 Control panel
NOTICE! Never touch two sensors simultaneously.