Instructions

42
1. This appliance is equipped with the environmental-friendly refrigerant
R600a. The refrigerant R600a is inflammable. The components of
the cooling circuit must neither be damaged during transport nor use.
2. If any part of the cooling circuit is damaged, the appliance must not
stand near a fire, naked light or spark-generating devices. Contact
the shop you purchased the appliance at immediately.
3. If gas is set free at the installation site:
a) Open all windows.
b) Do not unplug the appliance and do not use the control panel or
thermostat.
c) Do not touch the appliance until all the gas has gone.
d) Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other
sources of ignition when you dispose of or decommission the
appliance.
5. Do not install the appliance near of volatile or combustible materials
(e.g. gas, fuel, alcohol, paints) and in rooms which may have poor air
circulation (e.g. garage).
6. EXPLOSION HAZARD! Do not store any explosive materials or
sprays, which contain flammable propellants, in your appliance.
Explosive mixtures can explode there.
7. While unpacking, the packaging materials (polythene bags,
polystyrene pieces, etc.) should be kept away from children and pets.
CHOKING HAZARD! RISK OF INJURY!
8. Always observe the required minimum distances for proper
ventilation.
9. Do not connect the appliance to the electric supply unless all
packaging and transit protectors have been removed.
10. Operate the appliance with 220~240V/50Hz/AC only. All
connections and energy-leading components must be replaced by an
authorized professional.
11. Do not use a socket board or a multi socket when connecting the
appliance to the mains.
12. Never place portable multiple sockets or portable power supplies
behind the appliance. RISK OF FIRE!
13. A dedicated and properly grounded socket meeting the data of the
plug is required to minimize any kind of hazard. The appliance must
be grounded properly.
14. Always check that the power cord is not placed under the appliance
or damaged by moving the appliance.
15. The technical data of your energy supplier must meet the data on
the model plate of the appliance.
16. Your domestic circuit must be equipped with an automatic circuit