Instructions

112
FREEZER COMPARTMENT
1. Remove the contents from the freezing-compartment
and put them into a cooling box.
2. Place a container in front of the appliance to catch the
water.
3. Switch off the appliance by turning the thermostat to
position 0/AUS/OFF and disconnect it from the
mains.
4. When the encrusted ice melts put some dry cloths into
the freezer-compartment to hold the water back.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and
soft cloths.
8. After cleaning leave the door open for some time to
ventilate the appliance.
Optional procedure if encrusted ice should have
occurred:
WARNING! Switch off the appliance by turning
the thermostat (depending on model) to position 0 /
AUS / OFF and disconnect it from the mains.
WARNING! To disconnect the appliance from the
mains, you must unplug the appliance or use a cut-
off device.